topic Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi) in Operating System - HP-UX

Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi)

Veeravalli — Fri, 17 Mar 2006 17:42:41 GMT

Dear HP Gurus!

1. I need help adding a Kyocera FS-1900 printer on a HPUX 11.11 server.

2. I am using "hppi" verision E.10.34.

3. in the past I added --> Kyocera/Mita KM-6230 KX and Kyocera Mita FS-9520DN successfully using the Model-script for "5Si"= net_lj5x.

4. I tried the same Model script and all other Model scripts listed in hppi e.10.34 version and none were successfull.

5. Modelscripts tried are:
Model Script Printer
------------ -------------------------------------------------
net_ljx000 HP LaserJet 4000/5000/8000/8100 and HP Mopier 320 printers
net_ljcolor HP Color LaserJet 4500/8500 printers
net_lj5x HP LaserJet 5Si printers*
net_lj4x All HP LaserJet 4 series printers, plus Color LaserJets
net_lj4x HP DeskJet 1600C, 1200C and PaintJet XL300 w/ PostScript
net_lj3x HP LaserJet II/IID/III/IIID printers
net_lj3plus HP LaserJet II/IID/III/IIID printers with PostScript
net_dsnj HP DesignJet Series plotters with PostScript
dumbplot HP DesignJet Series plotters
dumbplot_printer HP/Non-HP printers
dumbplot_printer_cr HP/Non-HP printers with carriage return
net_genericplotter HP/Non-HP plotters with auto language selection
net_genericpcl3printer HP/Non-HP PCL 3 printers (see man page)
net_genericprinter HP/Non-HP printers with print options (see man page)
------------------ -------------------------------------------------

6. website for kyocera printer is :
http://usa.kyoceramita.com/KMAGlobalpub/jsp/Kyocera/products_printers_details.jsp?pid=12330

Can someone please guide me.

please help!

Thank you!
-PV
630-370-2948

Re: Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi)

Bill Hassell — Sat, 18 Mar 2006 00:06:47 GMT

The printer script for a simple ASCII file is unimportant. These scripts merely enhance the print job so if you don't see any output at all, start with the basics. Does the Kyocera printer have an HP JetDirect LAN card? If not, then you can't use the proprietary HPPI software. HPPI is uses a special port (9100) and protocol. Non-HP LAN cards use the simple RFC 1179 protocol known as remote printing and implemented in Unix and PC systems as well as non-HP LAN cards.

Now if you have this printer connected using an HP LAN card such as the JetDirect/EX, run a communication selftest by pressing the EX's selftest button for about 1 second. This will transmit a simple ASCII file to the printer showing the EX's settings. If this fails, there is something broken with the EX box, the LAN-to-printer cable, or with the printer itself. Until the selftest works, there is no point in trying to get the printer to connect on the network.

Re: Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi)

Veeravalli — Mon, 20 Mar 2006 11:09:13 GMT

No, I do not think the kyocera printer has any JetDirect card in it.

It just selected 5Si's Model script and it worked for the kyocera printer I configured in the past.

But for this FS1900 model, nothing is working.

if I cannot use "hppi" is there any other way I can start printing from HPUX to this Kyocera printer?

please advice,
thank you,
-PV

Re: Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi)

A. Clay Stephenson — Mon, 20 Mar 2006 11:18:23 GMT

Yes. Hppi sets up what is known as a "Network" printer in HP-UX speak. This is the preferred method because you have much greater control over the printer. The other method uses the LPR/LPD protocol as is referred to as a "Remote" printer. You need to know the hostname of the printer and the name of the print queue on this printer (e.g. TEXT, BINARY, POSTSCSRIPT, RAW). On some printers the name of the queue changes the behavior of the device and on others it does nothing. You need to study your printer's documentation for this queue name.
The easist way to set up a remote printer is via SAM but you can also simply use lpadmin.

Re: Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi)

Veeravalli — Mon, 20 Mar 2006 11:47:08 GMT

I forogt about adding printers as remote printers.

thanks for that hint.

I was able to add the printer as a remote printer.

I am waiting for the person in CA to confirm if my test jobs printed good.

waiting fingers crossed.

thank you!
-PV

Re: Add a Kyocera FS-1900 printer on HPUX 11.11 using JetDirect E.10.34 (hppi)

Veeravalli — Mon, 20 Mar 2006 11:58:41 GMT

Thank you!

I was able to add the printer as a remote printer (using SAM).

thank you all again!
-PV