topic Re: Configuring a Sharp AR-MR237 printer in Operating System - HP-UX

Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 10:55:00 GMT

Hi Team,

I need:
Configuring a Sharp AR-MR237 printer and print three copies by document

Thanks

Note:
Only it's printing one copie.

Re: Configuring a Sharp AR-MR237 printer

A. Clay Stephenson — Mon, 24 Apr 2006 10:58:29 GMT

Simply add -n3 to the lp command. Man lp for details.

Plan B. Modify the prnter's interface file to default to 3 rather than 1 copies.

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 11:02:23 GMT

Hi,

Okey!

I'm used:
#lp -dtest1 -n3 /tmp/out.out

But nothing!!!

Only one copie.

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 11:05:05 GMT

Stephenson,

Where is file configuration ???

Re: Configuring a Sharp AR-MR237 printer

A. Clay Stephenson — Mon, 24 Apr 2006 11:14:54 GMT

You have probably set this thing up as a "Remote" (LPR/LPD protocol) rather than a "Network" (HP Port 9100 protocol) this severely limits your options to control the printer. The copies values is not passwd to the rlp command.

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 12:04:46 GMT

Hi,

Which it's setting correct ?

MC

Re: Configuring a Sharp AR-MR237 printer

A. Clay Stephenson — Mon, 24 Apr 2006 12:21:21 GMT

What you need to do is add this printer as a "Network" printer using the hppi command interactively. This printer understands the JetDirect (port 9100) protocol; you will need to choose a compatible HP Laserjet Model (your printer understands PCL6 and Postscript 3) so this should be rather easy.
If you have not done so, you will need to install the JetDirect software on your HP-UX box.

http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom〈=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=JetDirect

The -ncopies argument should then work.

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 12:37:42 GMT

Hi,

I have:

J4189-11001C
E.10.34
Hewlett-Packard JetDirect Printer Installer for Unix

But, i don't know how configured

It's Sharp Model AR-M237

MC

Re: Configuring a Sharp AR-MR237 printer

Rodney Hills — Mon, 24 Apr 2006 12:43:22 GMT

I setup an AR-M207 using port 9100 printing and it works fine. It even can use "divpage" to do 2-up and 4-up page printing. The Sharp printer for the most part understands PCL, but some things are little different then a HPLJ printer.

For instance, in my print driver script I do a reset on the printer at the end. This unfortunatelly does not reset duplex mode.

Also portrait duplex mode prints in duplex, but the pages are printed for the narrow edge (top) page turning, where-as HPLJ printers default to long edge (left).

HTH

-- Rod Hills

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 13:08:38 GMT

Hi,

The port 9100 is add in /etc/services ??

Syntax correct ?

Thanks.

Re: Configuring a Sharp AR-MR237 printer

A. Clay Stephenson — Mon, 24 Apr 2006 13:17:59 GMT

No, you don't need to do any of that. Just execute "hppi" and add the printer using the hostname you have assigned. The only area that will require a bit of experimentation is the choice of model scripts. You will choose from a list that will be presented since your Sharp printer will not be recognized as a LaserLet. I would try something like an LJ4000TN.

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Mon, 24 Apr 2006 13:29:46 GMT

Anexed file.

Thanks

Re: Configuring a Sharp AR-MR237 printer

A. Clay Stephenson — Mon, 24 Apr 2006 14:07:41 GMT

The Sharp printer is not responding as an HP
printer; however, that does mean that it will not work. You need to answer 'y' and continue. You should also check your printer's network configuration to make sure the port 9100 protocol is enabled.

Re: Configuring a Sharp AR-MR237 printer

Miguel Carabano_1 — Tue, 25 Apr 2006 11:39:33 GMT

Thanks Stephenson and Hills!

MC