topic Re: Execute permission denied in Operating System - HP-UX

Execute permission denied

Carles Viaplana — Fri, 02 Jun 2006 02:57:12 GMT

Hello,

I can't execute a file. See output:

# uname -a
HP-UX omniback B.11.11 U 9000/811 2010699390 unlimited-user license
# ll -d check_disk
-rwx------ 1 root sys 140888 Jun 2 10:00 check_disk
# ./check_disk
sh: ./check_disk: Execute permission denied.
# whoami
root
#

Any idea?
Thanks in advance for your help.
Regards,

Carles

Re: Execute permission denied

Hemmetter — Fri, 02 Jun 2006 03:04:59 GMT

Hi Carles

Try to execute by:

# sh -x ./heck_disk

it may show the problem.

rgds
HGH

Re: Execute permission denied

melvyn burnard — Fri, 02 Jun 2006 03:05:07 GMT

Is this a script?
or a compiled binary?
If a compiled binary where did you get it from?

Re: Execute permission denied

Hemmetter — Fri, 02 Jun 2006 03:07:34 GMT

Hi again

due to the size of 140888 byte i guess it is a binary

what gives
# file check_disk
?

HGH

Re: Execute permission denied

Carles Viaplana — Fri, 02 Jun 2006 03:09:44 GMT

Hello,

This is a compiled binary we get from http://www.nagiosexchange.org/HP-UX.81.0.html?&tx_netnagext_pi1[p_view]=40.

About file info...

# file check_disk
check_disk: PA-RISC2.0 shared executable dynamically linked -not stripped
#

Thanks in advance for your help.
Regards,

Carles

Re: Execute permission denied

melvyn burnard — Fri, 02 Jun 2006 03:11:32 GMT

That is what I suspected.
From your model string it appears this may be a PARISC 1.x server, and you are trying to run a binary compiled on a PARISC 2.x server.
This will give this error, you need to get a version compiled for use on a PARISC 1.x server

Re: Execute permission denied

Carles Viaplana — Fri, 02 Jun 2006 03:11:47 GMT

Hello again,

I already tried in other system (same HP-UX version) and it works fine.

Regards,

Carles

Re: Execute permission denied

Arunvijai_4 — Fri, 02 Jun 2006 03:14:23 GMT

Hi Carles,

Try to run under gdb ..

-Arun

Re: Execute permission denied

Carles Viaplana — Fri, 02 Jun 2006 03:38:26 GMT

Finally I found new script works fine on PA-RISC1.0.

Thanks to all for your help.
Regards,

Carles