topic Re: Text processing - newbie question in Operating System - HP-UX

Text processing - newbie question

Chris Ciapala — Sun, 23 Dec 2001 16:23:46 GMT

Hi gurus,
Story is: i've HP UX 11 box where /var is almost full. I know that there is method of deleting superseded patches. I know idea, but to commit patches I need to process output file (swlist -l...) to pass this file to swmodify. List is big (500 entries) so manually this is hard to do. Tasks to do:
- leave only unique entries,
- replace everything after PHXXXXX. with *. I know it can be done with awk and/or sed, grep, etc. but for now I can't handle this. Thanks guys.
Chris
PS Merry Christmas to everyone!!!

Re: Text processing - newbie question

Madhu Sudhan_1 — Sun, 23 Dec 2001 17:14:23 GMT

Can you attach that output file ?

Thanks,

Re: Text processing - newbie question

Sridhar Bhaskarla — Sun, 23 Dec 2001 18:41:52 GMT

Hi,

The best method to delete superceded patches is to use "cleanup" command.

Take a backup of /var/adm/sw/save to a tape and keep it safe for sometime before you run this command.

This command comes with the patch PHCO_24347, the latest one.

Use cleanup -C 2 to delete the patches that have been superceded twice. You can also preview it with -p switch.

This is equivalent to the command swmodify -x patch_commit

-Sri

Re: Text processing - newbie question

A. Clay Stephenson — Sun, 23 Dec 2001 20:22:00 GMT

Hi:

All you need to do is run the cleanup command. Typically cleanup -c 1 is all you need and restores the mosdt space. If your patches have been installed for quite a while (and thus you are confident of their integrity) then cleanup -c 1 is the best bet; otherwise -c 2 will leave you with 2 versions.

Re: Text processing - newbie question

fg_1 — Mon, 24 Dec 2001 14:14:52 GMT

Krystopf

Run the Cleanup -c 1 command.

This will take all patches that have been superseeded at least once on your system and remove them from the /var filesystem.

We ran this on all of our systems after each patch CD we apply and it averages about 200MB of space per system.

If you haven't run this in a while, you will probably gain anywhere from 250-500MB per system.

Before you run this, run the following:

1) make_tape_recovery or make_recovery -A -C -v (depending on version of ignite you have)

Good luck

Happy Holidays.