topic Re: parstatus on N-4000-75 abends in Operating System - HP-UX

parstatus on N-4000-75 abends

IT_2007 — Thu, 27 Jul 2006 13:51:11 GMT

what command to be run to see parstatus of Npar? This command works if it runs on rp7410 or higher level but abends.

Error: Unsupported platform. command aborted. (-12)

Re: parstatus on N-4000-75 abends

melvyn burnard — Thu, 27 Jul 2006 13:54:45 GMT

That is because an N-class server does NOT support Npars, so you cannot use this command.

Re: parstatus on N-4000-75 abends

Torsten. — Thu, 27 Jul 2006 13:55:51 GMT

only a cell-based system can using npartitions. a n4000 can't be partitioned - this is an Unsupported platform.

rp7400 - not cell-based
rp7410 - cell-based

Re: parstatus on N-4000-75 abends

IT_2007 — Thu, 27 Jul 2006 13:58:43 GMT

ok. thanks.

Re: parstatus on N-4000-75 abends

IT_2007 — Thu, 27 Jul 2006 14:00:41 GMT

got it. closing thread.