Printer Configuration

shreejesh — Thu, 17 Aug 2006 00:40:20 GMT

I have a question, there are almost 100 printers configured on one of my server. I have to configure these printers on one another server. Do i need to manually add all of them or there is a way to just shift the config file from one server to another.

Re: Printer Configuration

inventsekar_1 — Thu, 17 Aug 2006 00:59:58 GMT

yes. u can shift the config files as follows:

============================================================
Save Spooler Configuration
On the source system using SAM --> Printers & Plotters --> LP Spooler --> Save/Restore Spooler Configuration.

Select Actions --> Save Spooler Configuration to save the configuration to /var/sam/lp

On the source system excute "tar cvf /var/tmp/printers.tar /var/sam/lp and transfer to target system.

Restore Spooler Configuration
On the target system excute "tar xvf printers.tar"

On the target system excute "chmod 755 /var/sam/lp"

Ensure the following is installed:-
root@nquinch:/var/sam/lp # swlist | grep -i direct
J4189-11001C E.10.34 Hewlett-Packard JetDirect Printer Installer for Unix

On the target system using SAM --> Printers & Plotters --> LP Spooler --> Save/Restore Spooler Configuration.

Select Actions --> Restore Spooler Configuration to restore the configuration to /var/sam/lp

Run the following command after restoring the printer/spooler configuration through SAM:
# /opt/hpnpl/bin/transferqueue local
Enter the queue name or all to modify all the queues : all

============================================================
this information is from this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1049599

Re: Printer Configuration

shreejesh — Thu, 17 Aug 2006 02:14:11 GMT

closed

topic Printer Configuration in Operating System - HP-UX

Printer Configuration

Re: Printer Configuration

Re: Printer Configuration