topic Re: Samba Question in Operating System - HP-UX

Samba Question

Ranjith_5 — Fri, 18 Aug 2006 03:23:30 GMT

Hi All,

How can I configure hpux to use a printer configured on a windows machine, using samba.

Thanks in advance..

Regards,
Syam

Re: Samba Question

Peter Godron — Fri, 18 Aug 2006 03:32:22 GMT

Syam,
have you seen :
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=279007

Re: Samba Question

Arunvijai_4 — Fri, 18 Aug 2006 04:34:50 GMT

Hi Syam,

Check here : http://www.samba.org/samba/docs/man/Samba-Guide/secure.html#ch4ptrcfg

-Arun

Re: Samba Question

Ranjith_5 — Fri, 18 Aug 2006 05:10:26 GMT

Hi All,

Thanks for your kind response.

The links provided are not mentioning anything about printing from HPUX on a windows client. Any ideas are welcome. Need not be only samba.. I am trying to check lpr printing on windows.(Print Services for UNIX). Any one have the procedure for this OR samba.

Regards,
Syam

Re: Samba Question

Steven E. Protter — Fri, 18 Aug 2006 05:33:42 GMT

Syum,

Samba Configuration is the same on HP-UX samba client as any other.

Therefore all you need to do is change smb.conf or issue a smbclient or cifsclient command with a user and a password to create print connectivity.

You will most likely need a machine account for the HP-UX system set up on the Windows Primary Domain controller.

SEP

Re: Samba Question

Ranjith_5 — Fri, 18 Aug 2006 05:54:29 GMT

SHALOM SEP,

Can you please give me the procedure to make the hpux box to print on the windows printer. I have configured a network printer on the windows machine.

Regards,
Syam

Re: Samba Question

Jaime Bolanos Rojas. — Fri, 18 Aug 2006 06:13:20 GMT

Syam,

Take a look at this document and tell me if this is what you are looking for,

http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/printservicesunix.mspx

Regards,

Jaime.

Re: Samba Question

Ranjith_5 — Fri, 18 Aug 2006 06:29:22 GMT

Hi,

I tried configuring lpd printer for hpux.
I gave the follofing command from hpux

#lpstat -t
scheduler is running
system default destination set in default file: DFX
device for DFX: /dev/null
remote to: dfx5000 on 192.168.2.28
DFX accepting requests since Aug 18 13:30
printer DFX now sending DFX-5 to 192.168.2.28. enabled since Aug 18 14:15
fence priority : 0
DFX-5 root priority 0 Aug 18 14:18 on DFX
(standard input) 1326 bytes

After this i gave a print command.

#lpr -d

But it doesnt complete print request instead I get an error :

rlpstat: Connection to 192.168.2.28 is down

But I am ablr to ping to this ip. What could be the problem.

regards,
Syam

Re: Samba Question

Jaime Bolanos Rojas. — Fri, 18 Aug 2006 06:37:05 GMT

Syam,

You will definetely want to take a look at Peter's answer, I know it sound like a lot of reading, but you got to have that configure properly for you to be able to print on the window's printer.

Regards,

Jaime.

Re: Samba Question

Charles Harris — Fri, 18 Aug 2006 07:02:25 GMT

If you want to do it the really easy way, install cups - should be avilable in the HP-porting archives.

Minimal fuss, still uses Smb to connect etc...

Just my 2c.

-=ChaZ=-

Re: Samba Question

Steven E. Protter — Fri, 18 Aug 2006 07:10:37 GMT

Shalom Syam,

I'd recommend not running the lp utils at the same time as cups.

CUPS:
http://hpux.connect.org.uk/hppd/hpux/Sysadmin/cups-1.0.2/

This is kind of old and I have doubts it will work with a modern CIFS installation.

I think this doc will be more helpful.

http://docs.hp.com/en/B8725-90079/ch01s04.html

SEP

Re: Samba Question

Steven E. Protter — Fri, 18 Aug 2006 07:19:48 GMT

Sorry Syam,

Wrong doc posted before.

It has been a tough week.

http://docs.hp.com/en/B8725-90101/ch02s04.html

SEP

Re: Samba Question

Ranjith_5 — Tue, 06 Mar 2007 01:27:27 GMT

thread closed