topic Re: OpenSSH batch mode in Operating System - HP-UX

OpenSSH batch mode

Jeff_Traigle — Fri, 27 Oct 2006 15:08:48 GMT

I'm still digging aroundtrying to find an answer on my own, but thought someone here might have run into this or otherwise know offhand...

We were using OpenSSH v3.8.1p1 (compiled locally) until a couple of weeks ago, when I upgraded to OpenSSH 4.2p1. (Had to use the slightly older versions because we need to compile in the SecurID patches.)

The problem now is that using the batch mode (-b option) for sftp is forcing public key authentication. The previous version did not do this and is causing our developers some trouble. Any ideas how to force password authentication from the sftp client? Or is this even possible with the newer version?

Re: OpenSSH batch mode

Jeff_Traigle — Fri, 27 Oct 2006 15:32:05 GMT

Digging through the ssh_config man page, I found the BatchMode option. The default is "no", but the use of the -b option apparently switches it to "yes". Including "-o BatchMode=no" in the sftp command returned the old behavior the developers were expecting.

Re: OpenSSH batch mode

Jeff_Traigle — Fri, 27 Oct 2006 16:26:24 GMT

And in case anyone else stumbles onto this problem and needs the solution...

the "-o BatchMode=no" needs to go before the -b option on the command line