topic Re: Regenerate Print_manifest in Operating System - HP-UX

Regenerate Print_manifest

carodn — Mon, 30 Oct 2006 10:30:34 GMT

Hello!
How can I regenerate the print_manifest file, because this was replaced with another from other machine, so when I execute this command, it give me back the information from the other machine. If I do a machinfo command, it give me back the right information.

Re: Regenerate Print_manifest

spex — Mon, 30 Oct 2006 10:33:23 GMT

Hi,

Please refer to "Viewing and Printing a Manifest" available here:
http://docs.hp.com/en/B2355-90772/ch05s06.html

PCS

Re: Regenerate Print_manifest

Roland Piette — Tue, 31 Oct 2006 04:43:34 GMT

Hello,

Use simpely the print_manifest command.
It will generate a manifest.info file.

You will get more info if you do a "man print_manifest" command.

Regards,
Roland

Re: Regenerate Print_manifest

rariasn — Tue, 31 Oct 2006 04:53:27 GMT

Hi Carolina De Napoli,

# /opt/ignite/bin/print_manifest > $PWD/print_manifest_`hostname`.txt

man print_manifest

rgs.

Re: Regenerate Print_manifest

carodn — Tue, 31 Oct 2006 09:29:03 GMT

HI! thank you for all responses but my problem continue , I did all the advices..I executed the print_manifest,I read the man and papers but the information from the print_manifest continue differ from the machinfo, and this lastone is the correct..so I don't know how to level out the two reports. anybody can help me with that? thanks again and best regards.

Re: Regenerate Print_manifest

Peter Godron — Tue, 31 Oct 2006 09:36:08 GMT

Hi,
what are the differences in the reports? How do you know it is for an other machine.

What are your executables:
what `which print_manifest`
what `which machinfo`

Re: Regenerate Print_manifest

Roland Piette — Tue, 31 Oct 2006 09:45:01 GMT

Hi Carolina,

Some stupid thinks can happen. Could you control the permission on the file & directory.

On my system (/var/opt/ignite/local/manifest) all files have 644 as permission exept template.def wich has 444 bitmap.

Be sure to execute as root the command print_manifest and immediately after look at return code with echo $? command.

I hope it helps,
Roland

Re: Regenerate Print_manifest

carodn — Tue, 31 Oct 2006 10:28:46 GMT

Hello Peter!
One of the diferences in the reports is the serial no, and I know that this is for another machine because we made an ignite and this file was overwrote, and the information is from the machine where was take the original ignite.
The executables are:
/opt/ignite/bin/print_manifest
/usr/contrib/bin/machinfo

Hello Roland!
All files in /var/opt/ignite/local/manifest all files have 644 permission except template.def with 444 and all have root:sys except manifest.seed and template.def with bin:bin owner and group.
My user is root and after execute the print_manifest command, the return of the
echo $? is 0.

Thanks a lot for any advice..
Best Regards, Caro.

Re: Regenerate Print_manifest

carodn — Tue, 11 Nov 2008 12:42:17 GMT

No comments