topic Re: swagent error in Operating System - HP-UX

swagent error

Fabian Briseño — Mon, 20 Nov 2006 01:08:59 GMT

Hello Guys. im getting this error in my rp3440 with an 11.i OS, Isee no error messages in my swagentd.log file

msdicfg:/var/adm/sw> swlist -l product|grep -i jfs

ERROR: Could not contact host "msdicfg". Make sure the hostname is
correct and an absolute pathname is specified (beginning with
"/").
ERROR: More information may be found in the daemon logfile on this
target (default location is msdicfg:/var/adm/sw/swagentd.log)

Re: swagent error

Arunvijai_4 — Mon, 20 Nov 2006 01:12:56 GMT

Hi,

Try restarting swagent daemon by,

# swagentd -r

or

# /sbin/init.d/swagentd stop

# /sbin/init.d/swagentd start

Also make sure your /etc/resolv.conf is correct.

-Arun

Re: swagent error

Steven E. Protter — Mon, 20 Nov 2006 01:13:31 GMT

Shalom,

First steps always:

ps -ef | grep swagent

# See if there is a process. Usually there won't be.

/sbin/init.d/swagentd start

Use the -R command to restart the daemon.

SEP

Re: swagent error

Fabian Briseño — Mon, 20 Nov 2006 01:21:28 GMT

Sorry guys i was looking at the wrong log file, this is the output for the correct one.

======= 11/19/06 22:06:27 PST END swagentd (pid = 1402).

* Registered RPC protocol "ncacn_ip_tcp" with endpoint "2121".
* Registered RPC protocol "ncadg_ip_udp" with endpoint "2121".
WARNING: An attempt to get the network host entry for "msdicfg" failed.
This may result in denial of access to users and agents at
this host. Check the spelling of this name, then your
"/etc/hosts" file, or your "/etc/resolv.conf" file and DNS
resolver configuration. The nslookup program may be helpful
in isolating this problem.
* Checking job queue at 1 minute intervals.

swagentd file is running and I have already reatrted the swagentd deamon.

I compared "/etc/resolv.conf to other servers whe have and modified it to be in the same way as our ther servers.

/etc/hosts file I have also checked and everything seems fine.

What is: DNS resolver configuration ?.
And The nslookup program ?

Re: swagent error

Arunvijai_4 — Mon, 20 Nov 2006 01:35:35 GMT

Hi,

Did you restart swagent daemon after modifying /etc/resolv.conf and /etc/hosts files ? If not, please do it.

-Arun

Re: swagent error

Fabian Briseño — Mon, 20 Nov 2006 01:42:08 GMT

I did restar swagentd deamon after modifying resolv.conf.

Also I defined a new host name in /etc/hosts file and if I ping to it by name. It displays the follwing

ping MEX
ping: unknown host MEX

Re: swagent error

Fabian Briseño — Mon, 20 Nov 2006 01:47:56 GMT

after doing:
nslookup mex

msdicfg:/etc> nslookup mex
*** Warning - the local domain is not set.
*** Either hostname should be a domain name,
*** the domain should be specified in /etc/resolv.conf,
*** or the shell variable LOCALDOMAIN should be set.

Hope this helps. Thank you in advance

Re: swagent error

Yang Qin_1 — Mon, 20 Nov 2006 02:32:26 GMT

Hi, double check /etc/resolv.conf it seems that the "domain" is not properly configured

also compare /etc/nsswitch.conf with the one on the other server.

try to ping mex with full name "ping mex.xxx.xxx"

Yang

Re: swagent error

Fabian Briseño — Mon, 20 Nov 2006 02:47:43 GMT

/etc/nsswitch.conf file did not exist in the problem server, I created it copying it from another server, but still not it's not working.

Re: swagent error

Fabian Briseño — Mon, 20 Nov 2006 03:09:44 GMT

Problem solved guys.

I configured via SAM in networking something called:
NAME SERVICE SWITCH->hosts

And that fixed the problem.

Thanks for all your help guys.