topic Re: SAM exitcode -71 when trying to create new kernel (x25driver) in Operating System - HP-UX

SAM exitcode -71 when trying to create new kernel (x25driver)

EFLIGENIR — Thu, 07 Dec 2006 09:55:54 GMT

A x25 card has been installed on RP7410.
Trying to add x25 driver (strsx25) in kernel : have error exitcode -71:
Cannot build a kernel using /usr/sbin/config:
Stop.
config: make did an exit(1)
command exitted with exitcode -71

==> What shall I do?

Re: SAM exitcode -71 when trying to create new kernel (x25driver)

Peter Godron — Thu, 07 Dec 2006 10:29:01 GMT

Hi,
you may want to keep an eye on this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1081483

Re: SAM exitcode -71 when trying to create new kernel (x25driver)

Peter Godron — Thu, 07 Dec 2006 10:33:02 GMT

Hi,
sorry for second post !
Have you got the right driver ?

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=87902
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=177529

Might be worthwhile checking the hardware compatibility/driver version via the product code !

Re: SAM exitcode -71 when trying to create new kernel (x25driver)

EFLIGENIR — Fri, 08 Dec 2006 03:14:00 GMT

In fact the x25 software was not correctly installed.
After re-installation it's OK.