topic Non Protected BCV Replacement in Operating System - HP-UX

Non Protected BCV Replacement

Regina Mitchell — Wed, 13 Dec 2006 15:16:59 GMT

I have a server running HPUX 11.i. EMC will be replacing a bad disk non protected BCV disk. This disk is also part of /backup filesystem which is used for hot backup for Oracle.

EMC says they will do a full establish once the disk is replaced.

Are there any tasks that need to be completed prior and after by the system administrator?

All replies are appreciated.

Re: Non Protected BCV Replacement

Denver Osborn — Wed, 13 Dec 2006 15:36:54 GMT

Shouldn't be a prob... the LVM data from the standard won't change so nothing would have to be done. Do you have the BCV presented to any nodes? If so, just make sure it isn't active on those nodes.

-denver

Re: Non Protected BCV Replacement

Geoff Wild — Wed, 13 Dec 2006 15:40:35 GMT

All that needs to be done is a full establish.

As far as prior - make sure the file systems (on the backup server) are NOT mounted and the vg isn't activated.

Rgds...Geoff

Re: Non Protected BCV Replacement

Regina Mitchell — Thu, 14 Dec 2006 05:13:33 GMT

Thanks to both of y ou for replying. You have confirmed what I was told. Thanks again.

Re: Non Protected BCV Replacement

Regina Mitchell — Thu, 14 Dec 2006 05:14:30 GMT

Responses confirmed what I was told by another resource.