boot quorum on IA systems

Rick Garland — Wed, 07 Feb 2007 16:57:50 GMT

I am having trouble with the IA systems.
I have posted my commands and results here. Essentially I am getting the message that my boot devices are not efi partition. I know this particular system boots because it was bounced last night. No, did not test the mirror boot.

From previous posts, I should be see the "boot vmunix -lq" message. But instead I am see the "invalid efi partition" message.

Any clues?
Thanks

# lvlnboot -v
Boot Definitions for Volume Group /dev/vg00:
Physical Volumes belonging in Root Volume Group:
/dev/dsk/c2t0d0s2 (0/1/1/0.0.0) -- Boot Disk
/dev/dsk/c2t1d0s2 (0/1/1/0.1.0) -- Boot Disk
Boot: lvol1 on: /dev/dsk/c2t0d0s2
/dev/dsk/c2t1d0s2
Root: lvol3 on: /dev/dsk/c2t0d0s2
/dev/dsk/c2t1d0s2
Swap: lvol2 on: /dev/dsk/c2t0d0s2
/dev/dsk/c2t1d0s2
Dump: lvol2 on: /dev/dsk/c2t0d0s2, 0

# lifls /dev/rdsk/c2t0d0s2
ISL AUTO HPUX PAD LABEL

# efi_cp -d /dev/rdsk/c2t0d0s2 -u /EFI/HPUX/AUTO /tmp/AUTO
Invalid EFI partition: /dev/rdsk/c2t0d0s2
efi_cp: invalid efi device
# efi_cp -d /dev/rdsk/c2t1d0s2 -u /EFI/HPUX/AUTO /tmp/AUTO
Invalid EFI partition: /dev/rdsk/c2t1d0s2
efi_cp: invalid efi device

Re: boot quorum on IA systems

Rick Garland — Wed, 07 Feb 2007 17:07:35 GMT

Finding some info

Running the idisk command
idisk -p /dev/rdsk/c3t2d0s2
idisk version: 1.31
idisk: Primary partition information not valid.
Run idisk with -r option to restore.

Going to try and restore the partition info.

Re: boot quorum on IA systems

Rick Garland — Wed, 07 Feb 2007 17:29:43 GMT

I found what I needed - Thanks

Re: boot quorum on IA systems

Torsten. — Thu, 08 Feb 2007 05:52:34 GMT

Hi Rick,

look at http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1095387

topic boot quorum on IA systems in Operating System - HP-UX

boot quorum on IA systems

Re: boot quorum on IA systems

Re: boot quorum on IA systems

Re: boot quorum on IA systems