topic Re: How to determine ArrayID in Operating System - HP-UX

How to determine ArrayID

Wang,MinJie — Mon, 12 Mar 2007 21:26:46 GMT

Hi all
I've connected a "va" to my HP-UX workstation B2000
and then I want to use "amdsp" to display the status of "va". So how can I determine ArrayID of the VA
Thx in advance

Re: How to determine ArrayID

A. Clay Stephenson — Mon, 12 Mar 2007 21:31:27 GMT

"amdsp -i" will display the array ID's of any Arrays that are detected. You can then use those array ID's in subsequent commands.

Re: How to determine ArrayID

Wang,MinJie — Tue, 13 Mar 2007 02:03:06 GMT

Hi clay
When I run "amdsp -i"
it output the following error:
No arrays were found by the AM60Srvr

Re: How to determine ArrayID

Ralph Grothe — Tue, 13 Mar 2007 03:30:39 GMT

And if you supply your attached hostname?

e.g.

# /opt/sanmgr/commandview/client/sbin/armdsp -i $(uname -n)|awk '/que ID/{print$NF}'

Re: How to determine ArrayID

Joelmel Roche — Tue, 13 Mar 2007 04:58:05 GMT

use command armdsp -i

Re: How to determine ArrayID

Rasheed Tamton — Wed, 14 Mar 2007 03:25:11 GMT

Hi Wang,

How about cvui (CVUI - array manager interface)

and

armdiscover

Check this link for related info:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=825300

Regards,
Rasheed Tamton.

Re: How to determine ArrayID

Rasheed Tamton — Wed, 14 Mar 2007 03:31:17 GMT

This one is an old stuff I had. At present I am not able to check the systems attached to VA as we have already moved to EMC. Hope this might help you.

go into SAM
Select Disks and Files Systems
Select any hardware path in the HP AutoRAID LUN
Tab to Actions
Select Disk Array Maintenance
Select View Array Status Information

Regards,
Rasheed Tamton.

Re: How to determine ArrayID

Wang,MinJie — Wed, 14 Mar 2007 03:43:39 GMT

Thx all