topic Re: HPUX installation without CD-ROM drive in Operating System - HP-UX

HPUX installation without CD-ROM drive

Ruediger Steudte — Tue, 17 Apr 2007 10:22:04 GMT

Hello,

we have some HP C3700 wokstations without a CD-ROM drive. There is no existing installation on the system, because the harddisks are new.

In the first step of the installation, I will use an older Ignite image on the server. If this is not working, I will install HPUX over the network using a CD-ROM from an other workstation.

Could you give me a tip
-how to get a connection from the workstation to the Ignite Server?
-how can I use a CD-ROM on an other workstation?

Thank you and best regards
Ruediger

Re: HPUX installation without CD-ROM drive

Steven E. Protter — Tue, 17 Apr 2007 10:28:21 GMT

Shalom,

1) The Ignite server must be set up. The most important step is swcopy the OS to an NFS share that you configure into ignite.
2) Boot the workstation off its built in LAN card. Must be on the same subnet as the Ignite server or you need a boot helper.

At console, intervene by pressing a key
bo
Y To manuallly do it.
boot lan.ipaddress install

example

boot lan.192.168.0.10 install

Docs:
http://docs.hp.com/en/5991-7513/5991-7513.pdf
http://docs.hp.com/en/B2355-90153/apcs07.html

http://docs.hp.com/en/5991-6440/apas03.html

http://docs.hp.com/en/5990-8153/ch05s22.html

All you need to know is in the documents above.

SEP

Re: HPUX installation without CD-ROM drive

Rita C Workman — Tue, 17 Apr 2007 10:31:14 GMT

NFS........

Mount the CD on the another Server like normal.
Edit /etc/exports so that it looks something like this...
/SD-CDROM -root=

Save the file
Run exportfs -a

Now on your workstation
mkdir /SD-CDROM
mount :/SD-CDROM /SD-CDROM

Typed this quick, so hope no typos..

Rgrds,
Rita

Re: HPUX installation without CD-ROM drive

V. Nyga — Tue, 17 Apr 2007 10:32:37 GMT

Hi,

connection to ignite server is quite simple:
- interrupt boot process
- 'boot lan. install'
- interact with IPL - no
some more points ...

Then start ignite at the ignite server and make your configurations.

You should be able to use images down to C3000, maybe b-class.

HTH
Volkmar

Re: HPUX installation without CD-ROM drive

Torsten. — Tue, 17 Apr 2007 10:35:57 GMT

See this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1118802

Re: HPUX installation without CD-ROM drive

Ruediger Steudte — Tue, 17 Apr 2007 10:39:11 GMT

Hey Rita,

I think your suggestion to mount the CD-ROM is only working on a workstation with an already installed HPUX.

Ruediger

Re: HPUX installation without CD-ROM drive

V. Nyga — Tue, 17 Apr 2007 11:06:10 GMT

Hi again,

is your thread about 'changing installation from MTOE to TCOE' still current?
Nice to see someone else working with CAD.

Wo sitzt Du?

Gruesse aus Muenchen
Volkmar

Re: HPUX installation without CD-ROM drive

Patrick Wallek — Tue, 17 Apr 2007 11:28:45 GMT

You cannot boot one workstation form a CD-ROM drive on a different workstation.

If you want to use a CD to do the installation, your best bet is to get an external SCSI CDROM and use it.

Re: HPUX installation without CD-ROM drive

Ruediger Steudte — Fri, 18 May 2007 09:21:50 GMT

Thank you, with your help I´m now more familiar with Ignite and have installed some workstations from a golden image

@volkmar
Ich arbeite in der Nähe von Stuttgart bei der Firma Bilz und wir setzen im Bereich CAD noch UNIX ein. Meine Adresse ist der erste Buchstabe vom Vornamen dann der Familienname + Firmenname .de