https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055948#M435735 On 11.0, I removed a DLT8000 drive from the system that was at addr. 10/16/4.1.0<BR /><BR />after running "rmsf -a", the tape still show in the ioscan as no hardware. <BR /><BR />the man page notes that most drivers don't support "unbind" necessary to remove it a device from the system. <BR /><BR />So,<BR />a) is that why the dlt still show in ioscan?<BR />b) will this clear w/ a reboot? Mon, 02 Jul 2007 08:35:51 GMT OldSchool 2007-07-02T08:35:51Z https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055948#M435735 On 11.0, I removed a DLT8000 drive from the system that was at addr. 10/16/4.1.0<BR /><BR />after running "rmsf -a", the tape still show in the ioscan as no hardware. <BR /><BR />the man page notes that most drivers don't support "unbind" necessary to remove it a device from the system. <BR /><BR />So,<BR />a) is that why the dlt still show in ioscan?<BR />b) will this clear w/ a reboot? Mon, 02 Jul 2007 08:35:51 GMT https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055948#M435735 OldSchool 2007-07-02T08:35:51Z https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055949#M435736 It should clear after a reboot. Mon, 02 Jul 2007 08:38:36 GMT https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055949#M435736 Court Campbell 2007-07-02T08:38:36Z https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055950#M435737 Court answered my question Mon, 02 Jul 2007 08:39:55 GMT https://community.hpe.com/t5/operating-system-hp-ux/rmsf-question/m-p/5055950#M435737 OldSchool 2007-07-02T08:39:55Z