topic Re: How to rename disks in HP-UX 11iV3 / 11.31 in Operating System - HP-UX

How to rename disks in HP-UX 11iV3 / 11.31

Holger Nieraad — Thu, 23 Aug 2007 03:52:10 GMT

Hello,

is it possible to rename disks in 11.31? For example: disk45 to disk10 ?
I know this is possible in Tru64 with #dsfmgr.
But this tool is not implemented in HP-UX.

regards
-Holger Nieraad-

Re: How to rename disks in HP-UX 11iV3 / 11.31

AwadheshPandey — Thu, 23 Aug 2007 03:59:22 GMT

HN,

Disk names are diffrent in HP-UX than Tru64. If you will issue a ioscan -fnCdisk you will find disk name in format /dev/dsk/c#t#d#.
c# â The number of the controller to which the disk drive is attached (used on HP-UX systems)

t# and d# â The target ID and device number that constitute the address of the disk drive on the controller (used on HP-UX systems)

s2 â The HP-UX partition number on the boot disk drive (used on HP-UX 11i Version 1.5 systems)

http://forums1.itrc.hp.com/service/forums/postanswer.do?threadid=1155293&forumId=1&closedFlag=0

Re: How to rename disks in HP-UX 11iV3 / 11.31

AwadheshPandey — Thu, 23 Aug 2007 04:03:58 GMT

Add on:
Furthe disk can utilize in LVM or VxVM, there you can create logical partitions and name as per your choice.
http://docs.hp.com/en/B7961-90020/ch03s07.html

Re: How to rename disks in HP-UX 11iV3 / 11.31

Holger Nieraad — Thu, 23 Aug 2007 04:04:34 GMT

I use the new agile view in 11.31.
So, i find disk45 and would rename it to disk10.

# ioscan -funC disk -N
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
disk 10 64000/0xfa00/0x0 esdisk CLAIMED DEVICE TEAC DW-224E
/dev/disk/disk10 /dev/rdisk/disk10
disk 11 64000/0xfa00/0x1 esdisk CLAIMED DEVICE HP 73.4GST373453LC
/dev/disk/disk11 /dev/rdisk/disk11
/dev/disk/disk11_p1 /dev/rdisk/disk11_p1
/dev/disk/disk11_p2 /dev/rdisk/disk11_p2
/dev/disk/disk11_p3 /dev/rdisk/disk11_p3
disk 45 64000/0xfa00/0x15 esdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/disk/disk45 /dev/rdisk/disk45

Re: How to rename disks in HP-UX 11iV3 / 11.31

marie-noelle jeanson — Fri, 24 Aug 2007 12:00:20 GMT

Hi,

You may want to use the command io_redirect_dsf (1M). See http://docs.fc.hp.com/en/B2355-60130/io_redirect_dsf.1M.html

Example:
io_redirect_dsf -d /dev/disk/disk23 -n /dev/disk/disk26

Marie.

Re: How to rename disks in HP-UX 11iV3 / 11.31

marie-noelle jeanson — Fri, 24 Aug 2007 15:27:31 GMT

By the way, ioinit -f is another possibility to do the same.
See ioinit(1m).

Marie.

Re: How to rename disks in HP-UX 11iV3 / 11.31

whiteknight — Sat, 25 Aug 2007 13:19:00 GMT

Hi Holger,

See the 11iv3 LVM management also few things to consider as well (see steps 1-10)

http://docs.hp.com/en/5991-6481/ch04s09.html

WK

please assign points

Re: How to rename disks in HP-UX 11iV3 / 11.31

Steven E. Protter — Sun, 26 Aug 2007 14:02:52 GMT

Shalom,

Disk renaming procedures, which are really instance re-numbering procedures have limited ability to change the name's of disks.

However if all the disks in your system were present at first install, you are unlikely to get meaningful change from this risky procedure.

Far better than that is using lvcreate -n name to name logical volumes in a fashion that you prefer.

SEP

Re: How to rename disks in HP-UX 11iV3 / 11.31

ZAS-HP_Onsite — Mon, 27 Aug 2007 06:06:48 GMT

Hello & thanks,

io_redirect_dsf -d /dev/disk/disk23 -n /dev/disk/disk26 works only, when dsf (here 26) is present.
In my case it was not, and i try it with ioinit -f -> reboot. And this works.
Thanks for all hints in this case
-Holger-

Re: How to rename disks in HP-UX 11iV3 / 11.31

Holger Nieraad — Thu, 30 Aug 2007 04:02:15 GMT

thx for all replys
Works fine.

-Holger-