topic Re: Modem issue in Operating System - HP-UX

Modem issue

stevegray — Fri, 07 Sep 2007 05:57:11 GMT

I can connect to a client but the login prompt does not appear. The system I am dialing from is a K460 running 11.00 with a US-Robotics 33.6. The system I am trying to login into is a HP L2000-44 running 11.00. The modem there is a HP Support limK 56k.

When I use my NCR server it connects fine. I can login to the client site.

I copied the NCR line from Systems file to the
Systems file on HP.

The line is:
dollar-b Any ACU 19200 pittsburgh2618337 "" \r\d in:--in: uucpfisv word: fiserv1
23

I also copied over the files Devices, Modems and Dialcodes.

What could be the problem?

Steve

Re: Modem issue

Steven E. Protter — Fri, 07 Sep 2007 06:10:01 GMT

Shalom Steve,

Partial checklist:
1) See if there is dial tone.
2) Does the other system answer.
3) What gtty processes are running on the systems you can see.

SEP

Re: Modem issue

stevegray — Fri, 07 Sep 2007 06:16:08 GMT

I can dial into other systems with no problems.

Everything checks out. I am connected to the client site just cannot get to a login prompt.

Re: Modem issue

stevegray — Tue, 11 Sep 2007 09:30:51 GMT

No more responses.

I decided to close the thread.