topic Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o in Operating System - HP-UX

Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o

Duplicate Symbol — Mon, 24 Sep 2007 08:20:18 GMT

Dear all,

i just want to install driver A6684A on HP-UX 10.20 D Class server, but i get message from the swinstall log file is :

WARNING: 1 of 4 filesets had Warnings.
* 3 of 4 filesets had no Errors or Warnings.
WARNING: The Analysis Phase had warnings. See the above output for
details.

* Beginning the Install Execution Phase.
* Filesets: 4
* Files: 20
* Kbytes: 1796
* Installing bundle "A6684A,r=B.10.20.01" .
* Installing bundle "J3630BA,r=B.10.20.61" .
NOTE: Saving the current system file at "/stand/system" to
"/stand/system.prev"
NOTE: The template file has been extracted from "/stand/vmunix"
It has been placed in "/stand/system" where it will be used
to build a new kernel.
* Installing fileset "FCMS.FCMS-RUN,r=B.10.20.61" (1 of 4).
* Installing fileset "FCMS.FCMS-KRN,r=B.10.20.61" (2 of 4).
* Installing fileset "FC-TACHYON-TL.FC-TL-KRN,r=B.10.20.01" (3
of 4).
NOTE: Building a new kernel based on template file "/stand/system"
Compiling /stand/build/conf.c...
Loading the kernel...
/usr/ccs/bin/ld: Duplicate symbol "st_ats_enabled" in files /stand/build/conf.o and /usr/conf/lib/libhp-ux.a(scsi_tape.o)
/usr/ccs/bin/ld: Found 1 duplicate symbol(s)
/usr/ccs/bin/ld: Write failed in vmunix_test
*** Error exit code 1

Stop.
config: make did an exit(1)
config failure.
ERROR: The command "/usr/sbin/mk_kernel", which is used to rebuild
the kernel, has failed. Because kernel-related filesets were
installed, this command must be executed by "swinstall",
without failures, before the load can continue. Check the
above output for details about the failure.
NOTE: The Install Phase has suspended. Check the above output for
reasons.

===

How should i do to solved this problem ?

May i restart the server to solve ?

thanks

Please help me to replay also to my email :
Yohanes.Tjie@berca.co.id

Best Regards,

Re: Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o

Ivan Krastev — Mon, 24 Sep 2007 09:55:47 GMT

Check for these patch PHKL_22855.

regards,
ivan

Re: Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o

James George_1 — Mon, 24 Sep 2007 09:56:43 GMT

Hi

Check this posting :

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=122700

Rgds / James

Re: Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o

Duplicate Symbol — Mon, 24 Sep 2007 20:34:49 GMT

Hi Ivan, i have try to search that patch, but the web said patch ids not available.

Any ide ?

By the way, i am running HP-UX 10.20, and load the driver from the CD Application December 2001.

Re: Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o

Duplicate Symbol — Mon, 24 Sep 2007 20:38:45 GMT

Hi james,

Thanks for your suggestion, but when i click the link in that forum, it can't.

This the link i can't see :

Sanjay Dec 5, 2001 08:04:52 GMT 10 pts

--------------------------------------------------------------------------------
Hi Jay,

Take a look at the thread below,

http://us-support.external.hp.com/cki/bin/doc.pl/sid=647e46d202260fde3b/screen=cki
DisplayDocument?docId=200000048086704

Hope this helps.

Regds

Jay Pharis Dec 5, 2001 21:36:47 GMT N/A: Question Author

--------------------------------------------------------------------------------
Thanks! I've still got an issue with the 'Unsatisfied symbols', but I'll poke around to see what I can find on that.

Sanjay Dec 5, 2001 21:47:19 GMT Unassigned

--------------------------------------------------------------------------------
Hi Jay,

Try this link,

http://us-support.external.hp.com/cki/bin/doc.pl/sid=4d3089f40d1e50d463/screen=cki
DisplayDocument?docId=200000047972105

http://us-support.external.hp.com/cki/bin/doc.pl/sid=4d3089f40d1e50d463/screen=cki
DisplayDocument?docId=200000055837060

May be you can help me to inform what the step should i do ?

thanks

Re: Duplicate Symbol "st_ats_enable" in files in files /stand/build/conf.o

Duplicate Symbol — Tue, 25 Sep 2007 00:47:04 GMT

Thanks all, i was found the solution with install the PHKL_15790.

Rgds,