topic boot error in Operating System - HP-UX

boot error

Fernando Boza — Fri, 22 Feb 2008 20:43:40 GMT

During boot I have the following message:

Booting...
Boot IO Dependent Code (IODC) revision 1

HARD Booted.

ISL Revision A.00.43 Apr 12, 2000

ISL booting hpux 0/0/2/1.15.0/stand/vmunix

Boot
: disk(0/0/2/1.15.0.0.0.0.0;0)0/0/2/1.15.0/stand/vmunix
disk(0/0/2/1.15.0.0.0.0.0;0)/stand/0/0/2/1.15.0/stand/vmunix: cannot open, or not executable
Exec failed: No such file or directory

ISL>

I type "hpux" and boot continue.
Why ocur that?

Re: boot error

dinoside — Sat, 23 Feb 2008 06:36:55 GMT

hi Fernado

i guess u are pa-risk system
may be boot disk is diskbox(ex.ds####)

first lvlnboot -v (check bootdisk number)
and next type bleow
mkboot -a "hpux" /dev/dsk/c#d#t#

fyi

Re: boot error

Ramesh S — Mon, 25 Feb 2008 10:10:12 GMT

Hi

Sounds like BDRA corrupted on the root disk.

Boot the system in maintenance mode or recovery shell by install media and update the BDRA by "lvlnboot" command.

Thanks & Regards

Ramesh

Re: boot error

Mridul Shrivastava — Mon, 25 Feb 2008 15:39:53 GMT

Try booting the system in LVM maintenance mode using "hpux -lm" by interrupting the autoboot.

If it boots then check the output of lvlnboot -v? If its not correct the execute the following to configure the devices and reboot:

lvlnboot -r
lvlnboot -b
lvlnboot -d
lvlnboot -s
lvlnboot -R

Make sure that you reboot the system. Don't boot the system in multiuser mode from LVM maintenance mode, its not recommended.

Re: boot error

Fernando Boza — Mon, 25 Feb 2008 16:45:50 GMT

mkboot -a "hpux" /dev/dsk/c#d#t#

This correct the problem.
Thanks to all