topic Re: Supported speed and duplex setting for D380 built in LAN in Operating System - HP-UX

Supported speed and duplex setting for D380 built in LAN

Jino PV — Mon, 25 Feb 2008 11:37:11 GMT

Hi All,

Can any of you let me know whats the dupplex setting supported for d380 built in LAN?

I think it support only 10mbps speed. Its not showing duplex settings. Its not showing me the speed setting too using the following command.
OS- hpux-10.20

lanadmin -x 4(This is NMID)

"lanadmin -s 4" shows me the speed but not showing th duplex setting. I do feel that this interface will support only half duplex. Can any one confirm on this?
Unfortunately the man page for lanadmin gives me junk.

Thanks and regards

Jino

Re: Supported speed and duplex setting for D380 built in LAN

Pete Randall — Mon, 25 Feb 2008 11:59:10 GMT

See this thread:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1177266

Pete

Re: Supported speed and duplex setting for D380 built in LAN

Pete Randall — Mon, 25 Feb 2008 12:06:29 GMT

I suppose I should mention that the referenced thread talks about a D350, but the internal NIC is the same for both the 350 and the 380.

Pete

Re: Supported speed and duplex setting for D380 built in LAN

Jino PV — Mon, 25 Feb 2008 17:23:51 GMT

Hi Pete,

No idea how I have missed that thread :)

Thanks for the link

Regards,

Re: Supported speed and duplex setting for D380 built in LAN

Jino PV — Mon, 25 Feb 2008 17:25:14 GMT

closing the thread