topic Re: pvchange -t command in Operating System - HP-UX

pvchange -t command

Yaash — Mon, 31 Mar 2008 07:19:38 GMT

Hello,

I would like to run a pvchange -t command to increase the I/O timeout on a particular disk.
Can I run the command on the disk while the volume grom the disk is allocated to is active (aswell as filesystems mounted).

Thanks,
Yash

Re: pvchange -t command

Siju Vadakkan — Mon, 31 Mar 2008 07:30:37 GMT

yes, You execute pvchange command when VG is activated and LV are mounted.

Re: pvchange -t command

Sajjad Sahir — Mon, 31 Mar 2008 07:46:24 GMT

volume group is in shared mode if it is in shared mode u can't use.

Re: pvchange -t command

Yaash — Mon, 31 Mar 2008 07:51:09 GMT

Hi,

Thanks for the replies. Volume group was activated with the "-a y" flag, so not in shared mode.

Re: pvchange -t command

Sajjad Sahir — Mon, 31 Mar 2008 08:29:38 GMT

then no problem
do what sajid said

Re: pvchange -t command

Sajjad Sahir — Mon, 31 Mar 2008 08:30:15 GMT

assign points to the poeplse who answering u questions

Re: pvchange -t command

Yaash — Mon, 31 Mar 2008 12:28:17 GMT

Many thanks. Question answered.