topic Re: https connection. in Operating System - HP-UX

https connection.

Davis Paul — Mon, 16 Jun 2008 06:55:27 GMT

Hi all,
I can connect my server by http://192.168.52.2:8081/Browserweb/Servlet/BroserSevlet/Webserver
The thing is that I want to use 'https' instead of http. Please tell me, what are the points I need to check on UNIX side. My OS is HP UX B.11.23.

Davis Paul

Re: https connection.

Jeeshan — Mon, 16 Jun 2008 07:07:42 GMT

if you have SSL encryption with http you can use https.

Re: https connection.

Jeeshan — Mon, 16 Jun 2008 07:13:08 GMT

check out this link

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1229925

Re: https connection.

Davis Paul — Mon, 16 Jun 2008 07:22:04 GMT

Dear Ashan,
How can I check whether I have SSL encryption with http or not?

Re: https connection.

Kenan Erdey — Mon, 16 Jun 2008 07:24:10 GMT

Hi,

you must change webserver configuration so that it serves with ssl. if your server runs apache, search for "apache ssl configuration".

Kenan.

Re: https connection.

Ralph Grothe — Mon, 16 Jun 2008 08:04:00 GMT

Hi Paul,

as already answered by the others
first of all the webserver must have been enabled to serve over SSL.
The standard port for SSL web content is 443/tcp but it may have been configured to serve on any other port.

If you have installed the OpenSSL library packet (often on an SSL enabled Apache webserver this is the case) then you could use the client command of the openssl tool to check whether the server is SSL enabled like e.g.

$ openssl s_client -connect 192.168.52.2:8081

Re: https connection.

Davis Paul — Tue, 17 Jun 2008 06:35:47 GMT

Hi,
Openssl is installed. See the out put of the command.

#openssl s_client -connect 192.168.52.2:8081
CONNECTED(00000003)

What is to be done next??

Re: https connection.

Davis Paul — Sun, 03 Aug 2008 08:08:31 GMT

closed