topic Re: How to see MP from HP-UX OS in Operating System - HP-UX

How to see MP from HP-UX OS

shashi kanth — Tue, 01 Jul 2008 06:33:53 GMT

From HP-UX os, how we can see it's console configuration, like it's MP IP address, hardware status, etc... ?

Re: How to see MP from HP-UX OS

Dennis Handly — Tue, 01 Jul 2008 07:17:27 GMT

You can't. The MP is a completely separate computer.
The most you could do is:
stty +resetGSP http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1227867

Re: How to see MP from HP-UX OS

shashi kanth — Tue, 01 Jul 2008 07:20:50 GMT

OK.

Looks like SUN is better here, i can modify/view console parameters from the Solaris OS itself.

Re: How to see MP from HP-UX OS

Torsten. — Tue, 01 Jul 2008 14:54:17 GMT

Well, it depends (as always).

In some configurations (model+OS) the SMH is using a special script to get the IP address.

This means, it is working on some models.

Re: How to see MP from HP-UX OS

Torsten. — Tue, 01 Jul 2008 14:57:51 GMT

Re: How to see MP from HP-UX OS

YAQUB_1 — Tue, 01 Jul 2008 17:05:35 GMT

Hi,

Loging MP LAN, then execute the below commands:-
>>> MP IP address

MP>cm
MP:CM>ls --------> lan status

>>> U did not menson which HP-UX box Ur using (Cellboard based)?

MP:CM>sysrev --------> system firmware version

MP:CM>pe ---------> system power option (Cellboard based)

MP:CM>pc ----------> system power option (non cellboard based)

MP:CM>cp ---------> Cabinet Parts
MP:CM>ps ---------> power status

U can also check the below thread:-
http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1225842

BR/
Yaqub

Re: How to see MP from HP-UX OS

shashi kanth — Wed, 02 Jul 2008 03:20:24 GMT

I got the answer, closing this thread.

Re: How to see MP from HP-UX OS

Shinji Teragaito_1 — Thu, 08 Jan 2009 07:37:51 GMT

Additional info.

What I mentioned above would be applicable on the environment
with SFM B.04.00.06.yy (11.23)/C.02.00.04.yy (11.31) or later.
Such enviroment has MP Instance Provider included in the
SFMProviderModule.

Shinji