topic Re: smh not starting in Operating System - HP-UX

smh not starting

moiauh — Tue, 01 Jul 2008 09:08:46 GMT

hello all,

not able to open smh. while doing the netstat for the port2301 and 2381,showing only 2301 is listening.

how to start port 2381?

cheers,

raju

Re: smh not starting

melvyn burnard — Tue, 01 Jul 2008 09:12:31 GMT

this will get started when you try to connect to either port

Re: smh not starting

Jeeshan — Tue, 01 Jul 2008 09:21:05 GMT

port doesn't start itself. but an application itself is able to enable for accesible the ports.

so, in your case check like below

#ps -ef|grep smh

and then try to telnet in that port
#netstat -an|grep 2301 (or 2381)

#telnet localhost 2301 (or 2381)

if connected than the port has open.

Re: smh not starting

Torsten. — Tue, 01 Jul 2008 09:34:44 GMT

Did you already read this?

# man smhstartconfig

...

Options
The smhstartconfig command supports the followings options:

-a {on|off} Enable/disable the "autostart URL" mode

-b {on|off} Enable/disable the "automatic startup on boot"
mode

Re: smh not starting

moiauh — Tue, 01 Jul 2008 11:51:03 GMT

is anyother thing like appache should be started?

Re: smh not starting

Torsten. — Tue, 01 Jul 2008 12:05:36 GMT

smh will start its own apache based on smh configuration.

Did you already use the smhstartconfig tool?

Re: smh not starting

moiauh — Wed, 02 Jul 2008 04:12:54 GMT

used the mhstartconfig tool,still same problem.
what's the service to be started?

Re: smh not starting

Torsten. — Wed, 02 Jul 2008 04:27:26 GMT

Does the connection to port 2301 work or not?

Re: smh not starting

Torsten. — Wed, 02 Jul 2008 04:39:52 GMT

Re: smh not starting

moiauh — Wed, 02 Jul 2008 08:17:21 GMT

it worked again it was the matter of service.thank you all

Re: smh not starting

moiauh — Wed, 02 Jul 2008 08:18:50 GMT

thank you all