topic Re: tusc command not working in Operating System - HP-UX

tusc command not working

Ski Ride — Tue, 02 Sep 2008 06:20:46 GMT

Hi All,

I have installed tusc but I encounter the following error.

# tusc ls
Aries ERROR:[pid=4257] Application makes TTRACE syscall without setting environment variable PA_DEBUG=1. Further emulation not possible.

Any help?

Re: tusc command not working

Ivan Krastev — Tue, 02 Sep 2008 06:58:32 GMT

Check your tusc version and verify that its 64 bit.

# file tusc

If you see "PA-RISC1.1 shared executable -not stripped" you need to install 64 bit version.

regards,
ivan

Re: tusc command not working

skt_skt — Tue, 02 Sep 2008 09:22:03 GMT

sounds like tusc verison and h/w type is not matching. tusc is different for both rp and rx series

Re: tusc command not working

Grayh — Tue, 02 Sep 2008 10:32:51 GMT

export PA_DEBUG=1
tusc

tusc

The following doc might of of good help to you..

http://h21007.www2.hp.com/portal/site/dspp/menuitem.863c3e4cbcdc3f3515b49c108973a801?ciid=f6ccb52bdb779110VgnVCM100000275d6e10RCRD

Re: tusc command not working

Ski Ride — Tue, 02 Sep 2008 11:18:46 GMT

Ya as Ivan Krastev pointed out copied the files tusc truss and sstep from a 64 bit machine to the current one.