topic Re: Backups User with the only function to create Ignite in Operating System - HP-UX

Backups User with the only function to create Ignite

Carlos Corredor — Thu, 04 Sep 2008 13:36:27 GMT

How to creates a user with the only function to create ignites in HPUX - 11.23 ia64 (If is Interactive much better)

Thanks

Re: Backups User with the only function to create Ignite

Mark McDonald_2 — Thu, 04 Sep 2008 13:40:14 GMT

Either add something to the .profile to launch the ignite gui.

Or add the ignite commands to sudo for the user.

Re: Backups User with the only function to create Ignite

Ivan Krastev — Thu, 04 Sep 2008 13:40:55 GMT

What ignite you want to create - network or tape?

You can schedule a cronjob to perform the task with make_net(tape)_recovery and check the output.

Otherwise create restricted user with sudo access to these commands.

regards,
ivan

Re: Backups User with the only function to create Ignite

Carlos Corredor — Thu, 04 Sep 2008 14:16:18 GMT

Thank you for your response, where I can unload this product? (SUDO).

It is necessary to do an ignite before installing the package?

HP-UX 11.23 ia64

Thanks

Re: Backups User with the only function to create Ignite

Torsten. — Thu, 04 Sep 2008 15:30:05 GMT

sudo is here:

http://hpux.asknet.de/ftp/hpux/Sysadmin/sudo-1.6.9p17/sudo-1.6.9p17-ia64-11.23.depot.gz

http://hpux.asknet.de/hppd/cgi-bin/redirect?hpux/Sysadmin/sudo-1.6.9p17/sudo-1.6.9p17-ia64-11.23.depot.gz

Re: Backups User with the only function to create Ignite

Tim Nelson — Thu, 04 Sep 2008 17:36:33 GMT

No additional software required if you wish to use restricted SAM.

Re: Backups User with the only function to create Ignite

Carlos Corredor — Wed, 13 May 2009 13:50:26 GMT

Thanks