topic Ignite in Operating System - HP-UX

Ignite

Grayh — Mon, 29 Sep 2008 19:04:12 GMT

What is the equivalent command for dbprofile -dn igniteprof -sip 16.4.95.14 -cip 10.4.95.91 -gip 10.4.95.1 -m 255.255.255.0 -b "/opt/ignite/boot/nbp.efi" on a PA-RISC Machine....

EFI> .....

Re: Ignite

Grayh — Mon, 29 Sep 2008 19:12:57 GMT

I have one Ignite server[Itanium]

I am trying to ignite the PA-RISC client fr4om it... I have used the dbprofile command to ignite the Itanium clients...

Similarly which command should I need to use on the PA-RISC Machine.

Re: Ignite

Ivan Krastev — Mon, 29 Sep 2008 19:16:43 GMT

Use:

BOOT LAN.ip-addr INSTALL

ip-addr is IP of the Ignite server.

regards,
ivan

Re: Ignite

Grayh — Mon, 29 Sep 2008 19:18:51 GMT

ISL> boot lan.10.3.90.14 install

Not an isl command or utility.

Not an isl command or utility.

ISL> BOOT LAN.10.3.90 INSTALL

Not an isl command or utility.

Not an isl command or utility.

ISL>

Re: Ignite

Tim Nelson — Mon, 29 Sep 2008 20:05:53 GMT

lanboot

Re: Ignite

Tim Nelson — Mon, 29 Sep 2008 20:07:46 GMT

Please ignore my last post.

Re: Ignite

Tim Nelson — Mon, 29 Sep 2008 20:43:38 GMT

how about the boot command from the BCH prompt not ISL prompt ?

Re: Ignite

likid0 — Tue, 30 Sep 2008 07:04:26 GMT

As Tim says you have to issue the lanboot from the BHC> before going into the ISL

Re: Ignite

likid0 — Tue, 30 Sep 2008 07:05:16 GMT

Arg!, the boot lan command.

Sorry

Re: Ignite

SKR_1 — Tue, 30 Sep 2008 07:19:39 GMT

Refer below link

http://docs.hp.com/en/5991-1247B/ch05s17.html#aes-npar-229a

Thanks

SKR

Re: Ignite

Torsten. — Tue, 30 Sep 2008 07:41:53 GMT

You are already at ISL> - that means you bootet to the disk.

You need to stop at the BCH (boot menu) and do

---- Main Menu ---------------------------------------------------------------

Command Description
------- -----------
BOot [PRI|HAA|ALT|] Boot from specified path
PAth [PRI|HAA|ALT] [] Display or modify a path
SEArch [ALL||] Search for boot devices
ScRoll [ON|OFF] Display or change scrolling capability

COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands

DIsplay Redisplay the current menu
HElp [|] Display help for menu or command
REBOOT Restart Partition
RECONFIGRESET Reset to allow Reconfig Complex Profile
----
Main Menu: Enter command or menu > BOOT LAN.ip-address INSTALL

Re: Ignite

Grayh — Tue, 30 Sep 2008 12:47:56 GMT

thank you