topic Re: Errors while installing OS=11.23 on HPVM in Operating System - HP-UX

Errors while installing OS=11.23 on HPVM

Grayh — Thu, 02 Oct 2008 19:48:01 GMT

ERROR: The total volume sizes in disk group: "vg00" exceed
the available capacity by 23000Mb.

ERROR: The disk capacity available is not sufficient to
create the volume "/stand" with the size specified (disk
space is short by 1792Mb). Reduce the size of this volume
(or other volumes that share the same disk group), or useadditional/larger disks.

ERROR: The disk capacity available is not sufficient to
create the volume "primary" with the size specified (disk
space is short by 1024Mb). Reduce the size of this volume
(or other volumes that share the same disk group), or use additional/larger disks.

ERROR: The disk capacity available is not sufficient to
create the volume "/" with the size specified (disk space is
short by 1024Mb). Reduce the size of this volume (or other
volumes that share the same disk group), or use
additional/larger disks.

ERROR: The disk capacity available is not sufficient to create the volume "/tmp" with the size specified (disk space
is short by 512Mb). Reduce the size of this volume (or other
volumes that share the same disk group), or use
additional/larger disks.

ERROR: The disk capacity available is not sufficient to create the volume "/opt" with the size specified (disk space is short by 6448Mb). Reduce the size of this volume (or
other volumes that share the same disk group), or use
additional/larger disks.

ERROR: The disk capacity available is not sufficient to
create the volume "/usr" with the size specified (disk space
is short by 6024Mb). Reduce the size of this volume (orother volumes that share the same disk group), or use
additional/larger disks.

ERROR: The disk capacity available is not sufficient to
create the volume "/var" with the size specified (disk space
is short by 5336Mb). Reduce the size of this volume (or
other volumes that share the same disk group), or use ......

I have assigned lvol9 and lvol11 to one HPVM and lvol10 & lvol12 to the other HPVM

LV Name /dev/vg00/lvol9
LV Status available/syncd
LV Size (Mbytes) 10240
Current LE 320
Allocated PE 320
Used PV 1

LV Name /dev/vg00/lvol10
LV Status available/syncd
LV Size (Mbytes) 10240
Current LE 320
Allocated PE 320
Used PV 1

LV Name /dev/vg00/lvol11
LV Status available/syncd
LV Size (Mbytes) 40960
Current LE 1280
Allocated PE 1280
Used PV 1

LV Name /dev/vg00/lvol12
LV Status available/syncd
LV Size (Mbytes) 40960
Current LE 1280
Allocated PE 1280
Used PV 1

Re: Errors while installing OS=11.23 on HPVM

Grayh — Thu, 02 Oct 2008 20:16:14 GMT

IS there any specific size to be assigned to these virtual disks to load the OS if so could you plz tell me...

Re: Errors while installing OS=11.23 on HPVM

Grayh — Thu, 02 Oct 2008 20:21:28 GMT

I have noticed something over here though I have created all of them in a similar way

On one of the servers
--------------------
# hpvmstatus -s
[HPVM Server System Resources]

Processor speed = 1416 Mhz
Total physical memory = 4065 Mbytes
Total number of processors = 4
Available memory = 826 Mbytes
Available swap space = 5792 Mbytes
Maximum vcpus for an HP-UX virtual machine = 4
Maximum vcpus for a Windows virtual machine = 4
Maximum vcpus for a Linux virtual machine = 4
Available entitlement for a 1 way virtual machine = 1416 Mhz
Available entitlement for a 2 way virtual machine = 1416 Mhz
Available entitlement for a 3 way virtual machine = 1274 Mhz
Available entitlement for a 4 way virtual machine = 1274 Mhz

On the other server:-
------------------------
# hpvmstatus -s
[HPVM Server System Resources]

Processor speed = 1416 Mhz
Total physical memory = 16353 Mbytes
Total number of processors = 4
Available memory = 12316 Mbytes
Available swap space = 5792 Mbytes
Maximum vcpus for an HP-UX virtual machine = 4
Maximum vcpus for a Windows virtual machine = 4
Maximum vcpus for a Linux virtual machine = 4
Available entitlement for a 1 way virtual machine = 1416 Mhz
Available entitlement for a 2 way virtual machine = 1416 Mhz
Available entitlement for a 3 way virtual machine = 1274 Mhz
Available entitlement for a 4 way virtual machine = 1274 Mhz

Re: Errors while installing OS=11.23 on HPVM

Tim Nelson — Thu, 02 Oct 2008 20:32:36 GMT

Need ALOT more info from you.

Post hpvmstatus -vP your_vm

Post a screen shot of the hardware tab from the Ignite installer.

Maybe a screen shot of the LVM tab of the Ignite installer.

If you are cloning another OS with Ignite, what is the required size.

This all depends on what you are doing, what is included with the image you are installing, what is the configuration of the image you are installing. e.g. trying to assign 36GB of primary swap space to a 40GB backingstore will not leave any room for the os.

Re: Errors while installing OS=11.23 on HPVM

Grayh — Thu, 02 Oct 2008 20:37:58 GMT

# hpvmstatus -vP VM03A
Version A.03.50.00
[Virtual Machine Details]
Virtual Machine Name VM # OS Type State
==================== ===== ======= ========
VM03A 3 HPUX On (OS)

[Authorized Administrators]
Oper Groups:
Admin Groups:
Oper Users:
Admin Users:

[Virtual CPU Details]
#vCPUs Entitlement Maximum
====== =========== =======
2 10.0% 100.0%

[Memory Details]
Total Reserved
Memory Memory
======= ========
1 GB 64 MB

[Storage Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
disk scsi 0 0 0 0 0 lv /dev/vg00/rlvol9
dvd scsi 0 0 0 1 0 disk /dev/rdsk/c1t0d0
disk scsi 0 0 0 2 0 lv /dev/vg00/rlvol11

[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === =================
vswitch lan vswth01 1 0 1 0 16-e6-99-54-8f-24

[Misc Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
serial com1 tty console

# hpvmstatus -vP VM03B
Version A.03.50.00
[Virtual Machine Details]
Virtual Machine Name VM # OS Type State
==================== ===== ======= ========
VM03B 2 HPUX On (EFI)

[Authorized Administrators]
Oper Groups:
Admin Groups:
Oper Users:
Admin Users:

[Virtual CPU Details]
#vCPUs Entitlement Maximum
====== =========== =======
2 10.0% 100.0%

[Memory Details]
Total Reserved
Memory Memory
======= ========
1 GB 64 MB

[Storage Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
disk scsi 0 0 0 0 0 lv /dev/vg00/rlvol10
dvd scsi 0 0 0 1 0 disk /dev/rdsk/c1t0d0
disk scsi 0 0 0 2 0 lv /dev/vg00/rlvol12

[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === =================
vswitch lan vswth01 2 0 1 0 12-58-f2-16-2a-08

[Misc Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
serial com1 tty console
#

>Post a screen shot of the hardware tab from the Ignite installer.

Installing the OS from a vdvd

Maybe a screen shot of the LVM tab of the Ignite installer.

Installing the OS from a vdvd

If you are cloning another OS with Ignite, what is the required size.

No Cloning..

# diskinfo /dev/rdsk/c0t0d0
SCSI describe of /dev/rdsk/c0t0d0:
vendor: HP
product id: IR Volume
type: direct access
size: 142577664 Kbytes
bytes per sector: 512

Re: Errors while installing OS=11.23 on HPVM

Tim Nelson — Thu, 02 Oct 2008 20:52:53 GMT

This info does not help. Need to know what the installer sees as storage, need to know what it is trying to configure for LV sizes.

What ever storage the installer sees is obviously not enough or does not even exist. Either fix the storage or review the lvol sizes for some anomoly. If we cannot see what you are doing then we cannot help. Sorry.

>>>YOUR INFO
>Post a screen shot of the hardware tab from the Ignite installer.

Installing the OS from a vdvd

Maybe a screen shot of the LVM tab of the Ignite installer.

Installing the OS from a vdvd

If you are cloning another OS with Ignite, what is the required size.

No Cloning..

# diskinfo /dev/rdsk/c0t0d0
SCSI describe of /dev/rdsk/c0t0d0:
vendor: HP
product id: IR Volume
type: direct access
size: 142577664 Kbytes
bytes per sector: 512

Re: Errors while installing OS=11.23 on HPVM

Patrice Le Guyader — Thu, 02 Oct 2008 21:21:36 GMT

Hello,

Which disk do you use ? If you installed HPUX on the c0t0d0(in the VM), sure there's not enough place, try to use c0t2d0.

Be careful when you select the disk in the menu.

Let us know.

Hope this helps
kenavo
Pat.

Re: Errors while installing OS=11.23 on HPVM

Grayh — Thu, 02 Oct 2008 22:19:17 GMT

Actually I have only 2 disks on the server each of 146 GB and so I have done implemented a h/w raid on them. So I think I can use only c0t0d0 on which i have done a lvcreate of lvol9,10,11,12

>Post a screen shot of the hardware tab from the Ignite installer.

>Maybe a screen shot of the LVM tab of the Ignite installer.

If I can know how to capture the above two screen shots... I will do that and post it here.

Thank you..

Re: Errors while installing OS=11.23 on HPVM

kapilverma — Fri, 03 Oct 2008 02:27:05 GMT

Hi,

It is a HPVM. You try to remove all other partitions except /stand, /, swap. Assign all space /stand = 1792, swap = double of RAM/equally, / = rest of the space available. It should work.

Please check the Host Swap Size in HPVM. VM hosts required SWAP minimum 150 % of RAM Size.

Regards,
Kapil

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 04:15:32 GMT

after a fresh installation of the OS, I have instellad Integrity Vm and then did two lvcreate's of 10G and 40G each.... two VM guests.... and then installing the OS gotnstall th the errors...

So my issue is to install the OS on the Guest...

I can also remove the VM guests i have created or the lv's....

plz advise as to installing the OS...

what LVcreats should I do....

thank you

Re: Errors while installing OS=11.23 on HPVM

Patrice Le Guyader — Fri, 03 Oct 2008 05:30:03 GMT

Hello,

First to be sure you're using the good disk :

hpvmmodify -P VM03A -d disk:scsi:0,0,0:lv:/dev/vg00/rlvol9
hpvmmodify -P VM03A -d disk:scsi:0,0,2:lv:/dev/vg00/rlvol10
hpvmmodify -P VM03A -a disk:scsi:0,0,0:lv:/dev/vg00/rlvol10
hpvmmodify -P VM03A -a disk:scsi:0,0,2:lv:/dev/vg00/rlvol9

After that your vm should have the disk of 40 Go as c0t0d0 and the other as c0t2d0(only 10Go).
We need to be sure you're using the bigger and it's according to me safer to have it as first one to avoid error in the futur.

When you're in the "File System" part of the installation menu change all the flag indicating "Size: [Range MB ->]" for fixed one and then assign them enough space.

Let us know

Hope this helps
Kenavo
Pat.

Re: Errors while installing OS=11.23 on HPVM

Patrice Le Guyader — Fri, 03 Oct 2008 05:37:53 GMT

To avoid confusion, when I'm talking of disk it's only what you vm is seeing, which in fact is in our case only a logical volume on your host.

Host Guest
lvol10 --> c0t0d0
lvol9 --> c0t2d0

regards.

Hope this helps
Kenavo
Pat.

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 11:41:22 GMT

# hpvmmodify -P VM03A -d disk:scsi:0,0,0:lv:/dev/vg00/rlvol9
hpvmmodify: WARNING (host): Unable to open file '/dev/rdsk/c1t0d0' - No such dev
ice.
HPVM guest VM03A configuration problems:
Warning 1 on item /dev/rdsk/c1t0d0: Device file '/dev/rdsk/c1t0d0' in use by
another guest.
These problems may prevent HPVM guest VM03A from starting.
hpvmmodify: The modification process is continuing.
# hpvmmodify -P VM03B -d disk:scsi:0,0,2:lv:/dev/vg00/rlvol10
hpvmmodify: Unable to find device disk:scsi:0,0,2:lv:/dev/vg00/rlvol10.
hpvmmodify: Unable to modify the guest.

looks like I missed out somewhere

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 11:50:24 GMT

Below are the commands I have used to creats vdisks

# lvcreate -L 40960m -n lvol9 vg00
# lvcreate -L 40960m -n lvol10 vg00
# lvcreate -L 40960m -n lvol11 vg00
# lvcreate -L 40960m -n lvol12 vg00

# hpvmmodify -P VM03A -a disk:scsi::lv:/dev/vg00/rlvol9
# hpvmmodify -P VM03A -a disk:scsi::lv:/dev/vg00/rlvol11
# hpvmmodify -P VM03B -a disk:scsi::lv:/dev/vg00/rlvol10
# hpvmmodify -P VM03B -a disk:scsi::lv:/dev/vg00/rlvol12

Did I miss out something... Do I need to remove all of them and recreate..

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 12:11:00 GMT

plz tell me how to rectify this issue

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 12:46:08 GMT

All..

Could you tell me where I have done a mistake....

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 13:13:47 GMT

dparallel_scsi (2 devices)

0/0/0/0.0.0 32M HP_Virtual_LvDi 0x485020202020202
0/0/0/0.2.0 32M HP_Virtual_LvDi 0x485020202020202

Device ID: Device Id is not supported by this device.

Phys Location:

WWID: 0x48502020202020202f6465762f766730302f726c766f6c313100

It is taking the total size of the disk as only 32M... How can I change it

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 13:47:07 GMT

Anyone....

Torsten...Patrick...JRF.....where are you all Save me...

Today is my last day here...

Re: Errors while installing OS=11.23 on HPVM

Patrick Wallek — Fri, 03 Oct 2008 14:30:13 GMT

Sorry...No dice from me. I have never used any of the VM technology.

Re: Errors while installing OS=11.23 on HPVM

Grayh — Fri, 03 Oct 2008 14:35:55 GMT

Thanks everyone .... issue resolved by increasing lvol9 & 10