topic Re: enable ssh on blades in Operating System - HP-UX

enable ssh on blades

Grayh — Fri, 03 Oct 2008 19:23:44 GMT

how to enable ssh on the blade servers

Re: enable ssh on blades

Patrick Wallek — Fri, 03 Oct 2008 19:38:05 GMT

Install it and configure it.

If you have 11.31, it should be installed by default.

If not, get it and documentation here:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1471AA

Re: enable ssh on blades

Patrice Le Guyader — Fri, 03 Oct 2008 19:50:47 GMT

Hello,

It's very stange, for me it's full part of HPUX since at least hpux 11.23(even 11.11 but not sure lol).
I've installed both 11.23 and 11.31 on bl860c and I never need to add it, I think you've miss it in the selection of packages in the installation menu.

Hope this helps.
Kenavo
Pat.

Re: enable ssh on blades

James R. Ferguson — Fri, 03 Oct 2008 19:56:38 GMT

Hi:

> how to enable ssh ...

Do you mean "make work"?

# man ssh_config

Regards!

...JRF...

Re: enable ssh on blades

Grayh — Fri, 03 Oct 2008 20:26:16 GMT

# man ssh_config
No manual entry for ssh_config.

I am running hp-ux 11.23

my swlist

B9073BA B.11.23.08.03.00.22 HP-UX iCOD Instant Capacity (iCAP)
BUNDLE11i B.11.23.0409.3 Required Patch Bundle for HP-UX 11i v2 (B
.11.23), September 2004
Base-VXVM B.04.10.011 Base VERITAS Volume Manager Bundle 4.1 fo
r HP-UX
CDE-English B.11.23.0409 English CDE Environment
CommonIO B.11.23.0712 Common IO Drivers
FDDI-00 B.11.23.01 PCI FDDI;Supptd HW=A3739B;SW=J3626AA
FEATURE11i B.11.23.0712.070 Feature Enablement Patches for HP-UX 11
i v2, December 2007
FibrChanl-00 B.11.23.0712 PCI FibreChannel;Supptd HW=A6795A,A5158A
FibrChanl-01 B.11.23.08.02 FibrChnl;SupptdHW=A6826A,A9782A,A9784A,AB
378A,AB379A,AB465A,AD193A,AD194A,AD300A
GigEther-00 B.11.23.0512 PCI GigEther;Supptd HW=A4926A/A4929A/A609
6A;SW=J1642AA
GigEther-01 B.11.23.0712 PCI GigEther;Supptd HW=A6825A/A6794A/A684
7A/A8685A/A9782A/A9784A/A7109A/AB465A
GuestAVIOStor B.11.23.0806 HPVM Guest AVIO Storage Software
GuestAvioLan B.11.23.0809 HPVM Guest AVIO LAN Software
HPUX11i-OE B.11.23.0712 HP-UX Foundation Operating Environment Co
mponent
HPUXBaseAux B.11.23.0712 HP-UX Base OS Auxiliary
HPUXBaseOS B.11.23 HP-UX Base OS
HWEnable11i B.11.23.0712.070 Hardware Enablement Patches for HP-UX 1
1i v2, December 2007
HostAVIOStor B.11.23.0808 HPVM Host AVIO Storage Software
HostAvioLan B.11.23.0809 HPVM Host AVIO LAN Software
IEther-00 B.11.23.0712 PCI/PCI-X/PCIe IEther
LVMProvider R11.23.009 CIM/WBEM Provider for LVM
OnlineDiag B.11.23.10.05 HPUX 11.23 Support Tools Bundle, December
2007
QPKAPPS B.11.23.0712.070a Applications Patches for HP-UX 11i v2,
December 2007
QPKBASE B.11.23.0712.070a Base Quality Pack Bundle for HP-UX 11i
v2, December 2007
RAID-01 B.11.23.0712 RAID SA; Supptd HW=A7143A/A9890A/A9891A
HPUXBaseOS B.11.23 HP-UX Base OS
HWEnable11i B.11.23.0712.070 Hardware Enablement Patches for HP-UX 1
1i v2, December 2007
HostAVIOStor B.11.23.0808 HPVM Host AVIO Storage Software
HostAvioLan B.11.23.0809 HPVM Host AVIO LAN Software
IEther-00 B.11.23.0712 PCI/PCI-X/PCIe IEther
LVMProvider R11.23.009 CIM/WBEM Provider for LVM
OnlineDiag B.11.23.10.05 HPUX 11.23 Support Tools Bundle, December
2007
QPKAPPS B.11.23.0712.070a Applications Patches for HP-UX 11i v2,
December 2007
QPKBASE B.11.23.0712.070a Base Quality Pack Bundle for HP-UX 11i
v2, December 2007
RAID-01 B.11.23.0712 RAID SA; Supptd HW=A7143A/A9890A/A9891A
SerialSCSI-00 B.11.23.0712 PCI-X/PCI-E SerialSCSI
SysFaultMgmt B.05.00.05.01 HPUX System Fault Management
SysMgmtWeb A.2.2.7 HP-UX Web Based System Management User In
terfaces
T2767AC A.03.50 Integrity VM
USB-00 C.01.04.07 USB Subsystem and Drivers
VMGuestLib A.03.50 Integrity VM Guest Support Libraries
VMKernelSW A.03.50 Integrity VM Kernel Software
VMProvider A.03.50 WBEM Provider for Integrity VM
hpuxwsApache B.2.0.59.01 HP-UX Apache-based Web Server

Re: enable ssh on blades

Grayh — Fri, 03 Oct 2008 20:28:52 GMT

when I do ssh from my secure shell client I receive the message

The host x.x.x.x is not reacheble.
The host may be down or may be a problem.....

But I am able to do that via telnet...

So what should I do

Re: enable ssh on blades

Patrick Wallek — Fri, 03 Oct 2008 20:31:53 GMT

OK, so go to the link I gave you, download the software and install it.

SSH documentation, including installation instructions is available here:
http://docs.hp.com/en/internet.html#Secure%20Shell

Re: enable ssh on blades

Grayh — Sun, 05 Oct 2008 03:34:01 GMT

Hi Patrick,

Thanks for the link.... Now I need to install this on 10 servers.... Is there a simpler way that I can do.. Was just anxious to learn that as well... and try it out

An issue apart from this.... From Tuesday onwardes I will have to maintain IBM servers... So I was thinking if it is ok to post the issues here.... plz advise

Re: enable ssh on blades

Dennis Handly — Sun, 05 Oct 2008 07:56:51 GMT

>I will have to maintain IBM servers. So I was thinking if it is ok to post the issues here

Questions about IBM get deleted.
Unless you magically figured out how to install HP-UX on them. :-)

Re: enable ssh on blades

James R. Ferguson — Sun, 05 Oct 2008 14:43:39 GMT

Hi:

> Now I need to install this on 10 servers.... Is there a simpler way that I can do.

What's so hard about running 'swinstall'?:

http://h20392.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=T1471AA

Once you download the depot, copy it to the servers necessary and follow the simple installation instructions. No reboot is necessary.

Regards!

...JRF...

Re: enable ssh on blades

Ganesan R — Mon, 06 Oct 2008 10:42:31 GMT

Hi,

If you want to install the SSH bundle on 10 servers, keep the depot in one server, register the depot and install on other clients using this network depot.

Re: enable ssh on blades

Grayh — Mon, 06 Oct 2008 12:47:46 GMT

I have the following prompt when I login as root

root@hdasgd1#

I want to change it to # ... Could you give me the command plz

Re: enable ssh on blades

Dennis Handly — Mon, 06 Oct 2008 12:59:10 GMT

>I want to change it to #

PS1="# "

Re: enable ssh on blades

VVS — Mon, 06 Oct 2008 13:03:16 GMT

Change the value of PS1 variable in .profile file in the home directory og the user.

PS1="# "

regards,

VVS

Re: enable ssh on blades

Ganesan R — Mon, 06 Oct 2008 14:19:10 GMT

Hi,

After login as root do the following

# vi /.profile (assuming root home dir is /)

look the following line

PS1="$LOGNAME @ `hostname`"

Change this line to

PS1="#"

Re: enable ssh on blades

Torsten. — Mon, 06 Oct 2008 14:45:27 GMT

IIRC some threads before you asked something like

I have a prompt "#" and want to have something like

root@hdasgd1#

...

Re: enable ssh on blades

Grayh — Mon, 06 Oct 2008 14:56:55 GMT

thanks everyone