topic Ignite problem issue in Operating System - HP-UX

Ignite problem issue

mehul_3 — Fri, 10 Oct 2008 09:50:24 GMT

I am getting following error while taking ignite backup
# make_tape_recovery -A
* Creating local directories for configuration files and archive.

======= 10/10/08 16:22:07 IST Started make_tape_recovery. (Fri Oct 10
16:22:07 IST 2008)
@(#)Ignite-UX Revision C.6.9.141
@(#)ignite/net_recovery (opt) $Revision: 10.834 $ $Date: 2006/06/14
13:47:40 $

* Testing for necessary pax patch.
* Passed pax tests.
* Checking Versions of Ignite-UX filesets
ERROR: Failed to open tape device /dev/rmt/0mn:No such device or address
(errno = 6).
ERROR: Check tape device failed.

======= 10/10/08 16:22:11 IST make_tape_recovery completed unsuccessfully

Following is the ioscan fnC tape output
# ioscan -fnC tape
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
tape 1 0/5/1/0.3.0 stape CLAIMED DEVICE HP Ultrium 3-SCSI
/dev/rmt/1m /dev/rmt/c3t3d0BEST
/dev/rmt/1mb /dev/rmt/c3t3d0BESTb
/dev/rmt/1mn /dev/rmt/c3t3d0BESTn
/dev/rmt/1mnb /dev/rmt/c3t3d0BESTnb

Re: Ignite problem issue

sen_ux — Fri, 10 Oct 2008 09:58:23 GMT

Hi,

Below thread gives some info.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=62523

sen

Re: Ignite problem issue

Johnson Punniyalingam — Fri, 10 Oct 2008 10:06:31 GMT

Hi Mehul,

ioscan -fnC tape shows your "tape" at

/dev/rmt/1mn

make_tape_recovery -a /dev/rmt/1mn -x inc_entire=vg00 -A -v -I

suspecting your command is not correct or could be selecting invalid path for the tape

hope this helps,

Thanks,
Johnson

Re: Ignite problem issue

Ganesan R — Fri, 10 Oct 2008 10:08:29 GMT

Hi,

It is very clear that you don't have the tape drive at device path /dev/rmt/0mn.

In this situation you will have to specity the available device which is /dev/rmt/1mn.

#make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/1mn

Re: Ignite problem issue

Ganesan R — Fri, 10 Oct 2008 10:11:41 GMT

Hi,

Forget to mention, when you give just make_tape_recovery -A command alone it will try to use the default device /dev/rmt/0mn. That is why you are getting the error.

Re: Ignite problem issue

mehul_3 — Fri, 10 Oct 2008 10:25:52 GMT

Problem has been resovled by giving make_tape_recovery -a /dev/rmt/1mn