topic Re: INIT: Command is respawning too rapidly in Operating System - HP-UX

INIT: Command is respawning too rapidly

panks — Fri, 24 Oct 2008 19:54:25 GMT

Hi,
I am getting below error on console.
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: h1 "/sbin/init.d/init.cssd run >/dev/null 2>&1
Any idea on this?

Thanks

Re: INIT: Command is respawning too rapidly

Dennis Handly — Fri, 24 Oct 2008 21:50:53 GMT

Do you have any errors logged in syslog.log?

Re: INIT: Command is respawning too rapidly

Johnson Punniyalingam — Sat, 25 Oct 2008 00:53:17 GMT

Hi Panks,

what does the /var/adm/syslog/sysylog.log show.? you need check what does that entry
"/sbin/init.d/init.cssd run " --> cssd.?

recernlty i had same issue see below but in this case my entry on the inittab not important after commented the line

no more message pop-up
"INIT: Command is respawning too rapidly"

-----------------------------------------------------
INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id:Up2p "/opt/uptime2/bin/uptime2+"
-----------------------------------------------------

$ vi /etc/inittab (...comment out the below line)
#Up2p::respawn:/opt/uptime2/bin/uptime2+

Rgds,
Johnson

Re: INIT: Command is respawning too rapidly

Ismail DALKIRAN — Sat, 25 Oct 2008 05:00:25 GMT

You know these are Oracle Cluster processes that needs to be up during RAC initialization. You should better check oracle side.

Re: INIT: Command is respawning too rapidly

Wouter Jagers — Mon, 27 Oct 2008 12:26:06 GMT

As Ismail says, looks like an Oracle thing.

Is it possible that this happens when your Oracle is down ? I think I've seen this on a freshly installed machine where Oracle wasn't started at the time.

Cheers,
Wout

Re: INIT: Command is respawning too rapidly

TTr — Mon, 27 Oct 2008 13:35:39 GMT

Did you install 10g recently? Or is this leftover after installing and removing a RAC? Take a look at http://docs.hp.com/en/T2803-90002/ch03s05.html and scroll down to "Level:OR940" and see if it is the cause of your errors.

Re: INIT: Command is respawning too rapidly

panks — Mon, 27 Oct 2008 16:27:28 GMT

Thanks for the replies. Yeah I have oracle 10gr2 in this box with the RAC and ASM environment.
I was shutting down the node and DBA has shutdown the oracle instanaces that might have cuased to display these error messages.
Now its not coming.

Thanks Again

Re: INIT: Command is respawning too rapidly

panks — Mon, 27 Oct 2008 16:27:43 GMT

Thanks