topic Re: cmgetconf command giving error. in Operating System - HP-UX

cmgetconf command giving error.

jeevarajkn — Mon, 12 Jan 2009 09:36:09 GMT

Dear Guru,s

OS--HP UX 11.23 IA--RX6600 with
MC service Guard cluster.

cmgetconf command giving error while excuting from root login.

uaedxbpdctakp01>cmgetconf -c TAKAFLDB TAKAFLDB.conf
cmgetconf: User root from node uaedxbpdctakp01 is not authorized to execute
this command on cluster TAKAFLDB. Consult your cluster
administrator to obtain appropriate privileges through role-based access.
Check syslog file for more information.

Any one can help me solve this problem.

uaedxbpdctakp01>cmviewcl

CLUSTER STATUS
TAKAFLDB up

NODE STATUS STATE
uaedxbpdctakp01 up running

PACKAGE STATUS STATE AUTO_RUN NODE
pkg1 up running enabled uaedxbpdctakp01

NODE STATUS STATE
uaedxbpdctakp02 up running
Both node facing same issue.

Re: cmgetconf command giving error.

likid0 — Mon, 12 Jan 2009 14:35:18 GMT

check:

1. /etc/cmcluster/cmclnodelist

hostname/ipaddress root

put an entry for all the hosts on each node.

2.more /etc/inetd.conf |grep auth
auth stream tcp6 wait root /usr/lbin/identd identd

3.chech your /etc/hosts ,and check you can resolv names and ips of the members of the cluster from both nodes

Re: cmgetconf command giving error.

jeevarajkn — Tue, 13 Jan 2009 05:22:59 GMT

Hi Orange

While excuting more /etc/inetd.conf |grep auth; Iam getting below output.

auth stream tcp6 wait bin /usr/lbin/identd identd

you can see that its bin instead of root.

Also in both cluster node pkg1.cntl, pkg1.conf file permission is root:sys' but in other cluster servers it's root:root is it making any diffrence.

Re: cmgetconf command giving error.

jeevarajkn — Tue, 13 Jan 2009 10:17:45 GMT

Dear Guru's

Any can help me in thi case,,

Now I can see that rlogin from one node other is also not working...

Re: cmgetconf command giving error.

Avinash20 — Tue, 13 Jan 2009 14:41:19 GMT

Please check for

/etc/cmcluster/cmclnodelist
/.rhosts

Re: cmgetconf command giving error.

jeevarajkn — Wed, 14 Jan 2009 09:24:30 GMT

Dear All

Thanks For the repply. I am closing this case...