topic Re: Processor-Dependent Code in Operating System - HP-UX

Processor-Dependent Code

Angela Shepherd — Fri, 18 Jan 2002 20:06:36 GMT

I need a command to display the Processor-Dependent Code information (PDC).

Re: Processor-Dependent Code

James R. Ferguson — Fri, 18 Jan 2002 20:09:21 GMT

Hi Angela:

Try this:

# echo "selclass qualifier cpu;info;wait;infolog"|cstm > /tmp/procinfo

Regards!

...JRF...

Re: Processor-Dependent Code

Sridhar Bhaskarla — Fri, 18 Jan 2002 20:13:44 GMT

Hi Angela,

You can use cstm to display the PDC.

#/usr/sbin/cstm
cstm>map
Note the device number of any of
the CPUs say 55
cstm>sel device 55
cstm>infolog

This should display PDC firmware level.

-Sri