topic Re: fbackup problem in Operating System - HP-UX

fbackup problem

Sunil Kumar K.U. — Mon, 21 Jan 2002 07:03:34 GMT

Hello All,

At one of my customer sites, 45Gb of data in an HP9000/A400 server is backed up to DDS3 tape using fbackup from 'sam'.

Obviuosly the second tape is asked for after the first one is finished. The message asking to remove the 1st tape and put the 2nd one appears on the console. The actual probelm appears now. If the second tape is not inserted for around 2 hours, the output of the fbackup command goes to a file in the /dev directory. Due to this the root filesystem becomes full which causes so many hassles.

Is this problem faced by somebody in here? Or is there a suggestion to avoid this?

Thanks/regards

Sunil Kumar K.U.

Re: fbackup problem

Animesh Chakraborty — Mon, 21 Jan 2002 08:31:12 GMT

Hi,
see the link
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x8b4049c5ae73d4118fef0090279cd0f9,00.html

http://us-support3.external.hp.com/cki/bin/doc.pl/sid=f3be8d701624eee350/screen=ckiDisplayDocument?docId=200000048194555

Hope this helps
Animesh

Re: fbackup problem

Sunil Kumar K.U. — Mon, 21 Jan 2002 08:54:35 GMT

Hi Animesh,

The backup is initiated from 'sam'; not from a scipt. Is there a way to do this from 'sam'?

Thanks/Regards
Sunil Kumar K.U.

Re: fbackup problem

Animesh Chakraborty — Mon, 21 Jan 2002 09:28:39 GMT

Re: fbackup problem

Sunil Kumar K.U. — Mon, 21 Jan 2002 14:25:00 GMT

Hi Animesh,

This is what I wanted. I couldn't visit the US site at that time since it gave me an error message; sorry..

Thanks for the replies.

Thanks/Regards
Sunil Kumar K.U.