topic Re: level WBEM error occurred: CIM_ERR_FAILED in Operating System - HP-UX

level WBEM error occurred: CIM_ERR_FAILED

點燃 — Wed, 01 Apr 2009 04:32:43 GMT

Hi all,
We are getting the following error

'MIDB - TBSM ALert (minor) - hpsp1@hpsp1 - [MAN] cnt=1 Log /var/adm/syslog/syslog.log hpsp1 syslog: icodd: ERROR: The following low-level error occurred:ERROR: The following low-level WBEM error occurred: CIM_ERR_FAILED: A GENERAL ERROR OCCURRED THAT IS NOT COVERED BY A MORE SPECIFIC ERROR CODE'

server model: ia64 hp superdome server SD64A
OS version : B.11.23

Can anyone help?

thanks!

Re: level WBEM error occurred: CIM_ERR_FAILED

Torsten. — Wed, 01 Apr 2009 05:04:27 GMT

The iCOD/iCap software is based on WBEM, I would start to check if all needed providers are installed:

# cimprovider -l -s

Sometimes some are missing/not installed (e.g. nparprovider, etc.); you can get them from http://software.hp.com

Re: level WBEM error occurred: CIM_ERR_FAILED

Shinji Teragaito_1 — Thu, 02 Apr 2009 00:05:00 GMT

Hi,

Can you see one of the following messages in the syslog file ?

http://docs.hp.com/en/B9073-90192/ch02s03.html#v1560033

How ofter can you see the message in syslog ?

Which firmware version are you using ? The following firmware release notes may help you resolv the symptom.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=322822&swItem=ux-66820-1&prodNameId=322820&swEnvOID=2080&swLang=13&taskId=135&mode=4&idx=0

Hope this helps you,

Shinji

Re: level WBEM error occurred: CIM_ERR_FAILED

點燃 — Mon, 06 Apr 2009 01:24:22 GMT

Thanks all!