topic Re: can't login after converting to trusted system in Operating System - HP-UX

can't login after converting to trusted system

JEAN TAYLOR — Tue, 22 Jan 2002 22:52:47 GMT

We have several new cold installs of HP 11.0 where we selected the QPK1100 to install as part of the cold install. One machine will not allow logins after converted to trusted system. Logins are fine if the system is unconverted. Support center said that we should not have installed the Quality Pack as part of the cold install so we removed it and reinstalled choosing the managed patch selection rather than match what target has. This had no effect on the trusted system logins. We still cannot login after converting to a trusted system.

Re: can't login after converting to trusted system

Uday_S_Ankolekar — Tue, 22 Jan 2002 23:09:44 GMT

Hi,

Does your /etc/nsswitch.conf file read
passwd compat then change it to passwd files.

Goodluck,
-USA..

Re: can't login after converting to trusted system

Michael Tully — Tue, 22 Jan 2002 23:18:42 GMT

Hi,

If What Uday has suggested does not work,
untrust your system first. Boot into single
user mode and untrust it using this:

# /usr/lbin/tsconvert -r

HTH
-Michael

Re: can't login after converting to trusted system

Printaporn_1 — Wed, 23 Jan 2002 06:38:48 GMT

Hi,

Does all user cannot login after convert ?
after convert and create new user , does this new user can login ?
make sure that all user password not more than 8 character before convert to trusted system.

Re: can't login after converting to trusted system

Steve Steel — Wed, 23 Jan 2002 07:36:38 GMT

Re: can't login after converting to trusted system

JEAN TAYLOR — Thu, 24 Jan 2002 22:15:37 GMT

thanks for the replys. this system had other problems besides trusted system so we used one of the other systems. i didn't have a chance to try the suggestions as we're under the gun to get one of the servers into production.

Re: can't login after converting to trusted system

Craig Rants — Thu, 24 Jan 2002 22:47:33 GMT

When you are on the box (when not trusted), trust the box, then create a list of users to include root.

Then run this script against it

for USER in `cat list`
do
/usr/lbin/modprpw -V $USER
done

See if that helps.

C