topic Re: Need Information on HP integrity Server boot process. in Operating System - HP-UX

Need Information on HP integrity Server boot process.

GauravS — Wed, 29 Jul 2009 15:14:01 GMT

Hello Friends
I am new to HP-UX.I need some information on the HP integrity server boot process.Can somebody help me on this issue? Apart from that I have one more query. While uploading the patch how can I come to know that the patch need a reboot if the patch readme file is not available?
Thanks & Regards
Gaurav Sharma

Re: Need Information on HP integrity Server boot process.

Torsten. — Wed, 29 Jul 2009 15:25:44 GMT

There is always a patch readme at itrc.com patch database.

If using swinstall, the installer will tell you if a reboot is required.

About the boot:

1) switch the server on
2) selftest will run, EFI will be loaded
3) system will read boot path and the AUTO file, if configured, system will boot from specified disk
4) system will load the OS loader, this will load the kernel, OS will be startet

This is the general process in short version.

Re: Need Information on HP integrity Server boot process.

Steven E. Protter — Wed, 29 Jul 2009 15:38:09 GMT

Shalom,

http://docs.hp.com/en/5991-1247B_ed2/ch05s19.html

Full doc:
http://docs.hp.com/en/5991-1247B_ed2/5991-1247B_ed2.pdf

HP explains it well.

SEP

Re: Need Information on HP integrity Server boot process.

Lijeesh N G_1 — Wed, 29 Jul 2009 15:39:21 GMT

HI,

1)HP integrity server boot process?

>Power On Server
>Firmware initialization
a)PAL (Processor Abstraction Layer)- Initialize CPU
b)SAL (System Abstraction Layer) - Memory checks

c)EFI (Extended Firmware Interface)
>OS loader - HPUX.efi ==>load Kernel
>Kernel
>INIT process

2) patch need a reboot if the patch readme file is not available?
Take Patch ID and get the infos from the following patch databse link

http://www13.itrc.hp.com/service/patch/mainPage.do

Reagrds,
LIJEESH N G

Re: Need Information on HP integrity Server boot process.

Lijeesh N G_1 — Wed, 29 Jul 2009 15:43:50 GMT

Hi,

You can identify the patches which required reboot by the standerd icon (Monitor icon) from ITRC.

All PHKL patches required reboot.Most of the PHSS patches not required a reboot.

Regards,
LIJEESH N G

Re: Need Information on HP integrity Server boot process.

Dennis Handly — Wed, 29 Jul 2009 20:17:58 GMT

>how can I come to know that the patch need a reboot if the patch readme file is not available?

Inside of each patch is the README, in two places. You can use swlist to print it.
It is also there is the shar file.
You can also use swlist to check:
swlist -l product -a readme -s /tmp/PHCO_34668.depot
swlist -l fileset -a is_reboot -s $PWD/depot

Re: Need Information on HP integrity Server boot process.

R.K. # — Thu, 30 Jul 2009 02:35:01 GMT

Hi Gaurav,

Welcome to the forum !!

>>HP integrity server boot process
http://docs.hp.com/en/5992-4616/ch02s01.html#bjabiggf

>>patch need a reboot?
http://www13.itrc.hp.com/service/patch/mainPage.do?admit=109447627+1248924716826+28353475

Enter the patch name and you will get the details.

Regds,
R.K.

Re: Need Information on HP integrity Server boot process.

GauravS — Thu, 30 Jul 2009 15:24:00 GMT

Thank You all for you responses.