topic Re: finding software depot in Operating System - HP-UX

finding software depot

ROSS HANSON — Thu, 24 Jan 2002 17:21:36 GMT

Hello,
I am trying to load, from a CD, software onto a
A500 running 11i. When typing
swinstall -s of the depot software
I keep getting the error message

"There is currently no depot software on host XXX
at location XXX. Make sure that an absolute pathname is specified for loacation (beginning with "/")"

I have stopped and restart the swagentd but still
no go. I have also tried to run swreg -l depot and I still get nowhere

any ideas?

Re: finding software depot

Sanjay_6 — Thu, 24 Jan 2002 17:25:03 GMT

Hi Ross,

What is this software. Is it a file_name.depot file. Also have you tried the interactive "swinstall" screen rather than the command line.

Regds

Re: finding software depot

erics_1 — Thu, 24 Jan 2002 17:26:48 GMT

Ross,

I believe you need to go further into the directories. Off hand, I know that swinstall -s /cdrom/XSWGR1100/B.11.00 works. cd in the cdrom directory to get specifics.

Regards,
Eric

Re: finding software depot

Uday_S_Ankolekar — Thu, 24 Jan 2002 17:26:52 GMT

Hi,

Invoke swinstall - UI (interactive mode) menu and the select local dir and mention the source directory path

-USA..

Re: finding software depot

Darrell Allen — Thu, 24 Jan 2002 17:30:04 GMT

Hi Ross,

With swinstall you must specify the full (absolute) path of the depot file, not the directory, as well as the software you are installing:
swinstall -s /tmp/packagename.depot packagename
You may need other options as well. Check the install info with the package.

Darrell

Re: finding software depot

Uday_S_Ankolekar — Thu, 24 Jan 2002 17:30:35 GMT

Ooops,

Select CDROM instead of local Dir.. I thought you have Software depot files in the local directory.. Sorry

-USA..

Re: finding software depot

erics_1 — Thu, 24 Jan 2002 17:32:49 GMT

Ross,

I think I was a little quiick on the trigger. Try this procedure and see if that fixes your issue.

1: Remove the the mount point
(after umounting)
rmdir /cdrom

2: Create a mount mount point

mkdir /cdrom

3: Mount the CDROM media to /cdrom

mount -F cdfs /dev/dsk/cXtYdZ /cdrom

4: Restart the swagentd daemon

/usr/sbin/swagentd -r &

5: Register the mount point as a depot

swreg -l depot /cdrom

6: Install software from the CDROM again

swinstall -s /cdrom

Re: finding software depot

Darrell Allen — Thu, 24 Jan 2002 17:34:51 GMT

Clarification on my previous reply...

If you want interactive mode swinstall, omit the packagename.

Darrell

Re: finding software depot

Darrell Allen — Thu, 24 Jan 2002 17:54:26 GMT

Hi Ross,

Sometimes I'm an idiot. I rushed thru reading your post (wanting to go to lunch) without paying attention to what you said. I should have gone to lunch and remained quiet.

Mount your cd as Eric says. Run swinstall interactively (swinstall w/o options).
You can select "Find Local CD" if you like - it should return the mount point of your cd.
If, as in the case of the support plus cd, you get a message that the depot is empty, you will need to enter the path of the depot on the cd as the Source Depot Path (such as /cdrom/QPK1100).

You should then be good to go.

Darrell

Re: finding software depot

ROSS HANSON — Thu, 24 Jan 2002 18:48:29 GMT

I have tried to run the interactive mode of swinstall and receive the same error messages of "Not finding any
software depots at location"

I have also found, and tried, from the technical knowledge base the removing of the mount directory then remaking of the
directory and the stopping and
starting of the swagentd

The error messages from the
swagentd.log file is:
Failed to start source agent on /cdrom/X/X/X/X for root@X

/cdrom/X/X/X/X is not a valid depot

Re: finding software depot

Christopher McCray_1 — Thu, 24 Jan 2002 18:56:08 GMT

I had run into the same problem some time ago in where I was trying to install Online Diagnostics for 11.00. The path was /SD_CDROM/ONLINEDIAG/B.11.00. What got it to work was to register the depot:

# swreg -l depot /SD_CDROM/ONLINEDIAGS/B.11.00

I was then able to do my swinstall.

Use swreg -u to unregister when done.

Good luck

Chris

Re: finding software depot

Darrell Allen — Thu, 24 Jan 2002 19:10:33 GMT

Perhaps you could post the exact command you are entering as well as what software you are wanting to install.

As Eric suggested in his first reply, perhaps the depot path is deeper than you think.

Darrell

Re: finding software depot

Wodisch — Fri, 25 Jan 2002 03:33:37 GMT

Hello Ross,

I guess your CD is not mounted with the proper options...
Tell us what an "ls -l /mountpoint" looks like.

Perhaps you need to go down into another directory on the CD, uncompress/unzip an archive, or the filenames end with ";1"?

HTH,
Wodisch