KRNG11i refuses to load

Yegor Gorshkov — Thu, 10 Dec 2009 21:37:06 GMT

Hello, world.

I'm pretty new to HP-UX so I don't know where to start. I have to install KRNG11i on my 11.11 server. swinstall finished with some errors; after reboot the module refuses to load and swverify givese me some errors too.

Can somebody please shed some light?..

----------- dmesg says: ----------------
mod_obj_load: Undefined symbol rng_global in loadable module /stand/dlkm/mod.d/rng.
WARNING: MOD: mod_obj_load: Processing symbol table in module /stand/dlkm/mod.d/rng failed

---------- swverify says: ---------------
# swverify KRNG11i

======= 12/10/09 20:17:43 GMT BEGIN swverify SESSION
(non-interactive) (jobid=lerna-0077)

* Session started for user "root@lerna".

* Beginning Selection
* Target connection succeeded for "lerna:/".
NOTE: The software specification "KRNG11i" refers to a bundle (or to
a product, subproduct or fileset within a bundle). Only some
of the software specified could be selected. The messages
below show those items which could not be selected and those
items which were selected but generated a warning:
* Could not apply the software selection
"PHKL_27766,r=1.0,a=HP-UX_B.11.11_32/64,v=HP"; it is not
available from depot or root "lerna:/".
* Software selections:
KRNG11i,r=B.11.11.09,a=HP-UX_B.11.11_32/64,v=HP
+ PHKL_24554.C-INC,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_32/64
+ PHKL_24554.CORE-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_32/64
+ PHKL_24554.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
PHKL_27750.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_28122.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_29704.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_30034.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_30105.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_30472.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_32002.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_32668.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_33408.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_34309.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_34310.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_34311.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
+ PHKL_34986.CORE2-KRN,l=/,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,fr=1.0,fa=HP-UX_B.11.11_64
RandomNumGen.RNG-KRN,l=/,r=B.11.11.07,a=HP-UX_B.11.11_32/64,v=HP,fr=B.11.11.07,fa=HP-UX_B.11.11_64
RandomNumGenDyn.RNG-DKRN,l=/,r=B.11.11.09,a=HP-UX_B.11.11_32/64,v=HP,fr=B.11.11.09,fa=HP-UX_B.11.11_64
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swverify.last".
ERROR: "lerna:/": 1 files had errors during this operation.
* The analysis phase failed for "lerna:/".
* Verification had errors.

NOTE: More information may be found in the agent logfile using the
command "swjob -a log lerna-0077 @ lerna:/".

======= 12/10/09 20:17:50 GMT END swverify SESSION (non-interactive)
(jobid=lerna-0077)

Re: KRNG11i refuses to load

Patrick Wallek — Thu, 10 Dec 2009 21:40:30 GMT

Check the swinstall.log and swagent.log files in /var/adm/sw and post the error messages from the 'swinstall' session.

Those errors will help to diagnose your problem.

Re: KRNG11i refuses to load

Yegor Gorshkov — Thu, 10 Dec 2009 22:58:39 GMT

Thanks for the reference.

I've found the solution; uninstall/reinstall did the trick.

topic Re: KRNG11i refuses to load in Operating System - HP-UX

KRNG11i refuses to load

Re: KRNG11i refuses to load

Re: KRNG11i refuses to load