https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653797#M46703 Hi,<BR /><BR />Trying to do a OS backup using make_recovery command make_recovery -A -d /dev/rmt/1mnb. Get the following error message:<BR /><BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR /><BR />But after about 30 minutes, the message shows the recovery tape has been generated successfully. <BR /><BR />When I try to list the contents, get the error:<BR />mt -f /dev/rmt/1mnb rewind<BR />mt -f /dev/rmt/1mnb fsf 1<BR />tar -tvf /dev/rmt/1mnb<BR />Tar: blocksize = 0; broken pipe?<BR /><BR />I am wondering whether the recovery tape is ok or not? Appreciate if anyone can help. Thanks.<BR /><BR /><BR /><BR /><BR /><BR /> Mon, 28 Jan 2002 05:35:30 GMT jieshen 2002-01-28T05:35:30Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653797#M46703 Hi,<BR /><BR />Trying to do a OS backup using make_recovery command make_recovery -A -d /dev/rmt/1mnb. Get the following error message:<BR /><BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR />vxvm:vxprint: ERROR: IPC failure: Configuration daemon is not accessible<BR /><BR />But after about 30 minutes, the message shows the recovery tape has been generated successfully. <BR /><BR />When I try to list the contents, get the error:<BR />mt -f /dev/rmt/1mnb rewind<BR />mt -f /dev/rmt/1mnb fsf 1<BR />tar -tvf /dev/rmt/1mnb<BR />Tar: blocksize = 0; broken pipe?<BR /><BR />I am wondering whether the recovery tape is ok or not? Appreciate if anyone can help. Thanks.<BR /><BR /><BR /><BR /><BR /><BR /> Mon, 28 Jan 2002 05:35:30 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653797#M46703 jieshen 2002-01-28T05:35:30Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653798#M46704 Hi,<BR />Try this link.<BR /><A href="http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xdfb13fa720f3d5118ff40090279cd0f9,00.html" target="_blank">http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xdfb13fa720f3d5118ff40090279cd0f9,00.html</A><BR /> Mon, 28 Jan 2002 06:12:27 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653798#M46704 Animesh Chakraborty 2002-01-28T06:12:27Z https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653799#M46705 try use a rewind device when use with <BR />tar -tvf /dev/rmt/1mb.<BR /><BR />If that doesn't work still, try use<BR />make_recovery -A -d /dev/rmt/1mn Mon, 28 Jan 2002 06:12:33 GMT https://community.hpe.com/t5/operating-system-hp-ux/make-recovery-error-message/m-p/2653799#M46705 Wilfred Chau_1 2002-01-28T06:12:33Z