topic Re: modify maxvgs in Operating System - HP-UX

modify maxvgs

Eli Daniel — Mon, 15 Mar 2010 14:24:00 GMT

hi, have modify the parameter mxvgs
in the momento the value parameter mxvgs is: 10 default.

i need value mxvgs: 20

how ??

Re: modify maxvgs

James R. Ferguson — Mon, 15 Mar 2010 14:31:41 GMT

Hi:

You need to modify your kernel's 'maxvgs' tunable. This applies to any release prior to 11.31.

If kernel tuning is the issue, see:

http://docs.hp.com/en/B2355-90950/ch03.html

Regards!

...JRF...

Re: modify maxvgs

Eli Daniel — Mon, 15 Mar 2010 14:32:18 GMT

Operation System 11.23 Itanium.

Re: modify maxvgs

Johnson Punniyalingam — Mon, 15 Mar 2010 15:21:16 GMT

steps are given below thread ,

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1273017

also you can use SAM

from command line to change

# kctune -h maxvgs=20

Please refer to link post >>JRF

Re: modify maxvgs

Eli Daniel — Mon, 15 Mar 2010 15:26:10 GMT

This change is effective when starting the server?
can not be online?

Re: modify maxvgs

Johnson Punniyalingam — Mon, 15 Mar 2010 15:52:26 GMT

>>This change is effective when starting the server?
can not be online?<<

Hope Below link , helps to answer your above Question

http://docs.hp.com/en/B3921-90010/maxvgs.5.html

Re: modify maxvgs

Eli Daniel — Mon, 15 Mar 2010 16:30:45 GMT

thanks