topic Re: License Install in Operating System - HP-UX

License Install

Mike_21 — Wed, 30 Jan 2002 19:16:42 GMT

I have my Customer Identifier, for MirrorDIsk, Glance Plus, and MeasureWare. How do I add my license number?????

Thanks

Re: License Install

A. Clay Stephenson — Wed, 30 Jan 2002 19:21:35 GMT

The easiest method is to run swinstall interactively. I assume you have a codeword or used the online codeword generation tools. You have to have a codeword specific to a particular CD Part No. Under swinstall -> Actions -> Add New Codeword

Re: License Install

James R. Ferguson — Wed, 30 Jan 2002 19:21:46 GMT

Hi Mike:

Run the GUI version of 'swinstall', load and reference the depot of the approprate CDROM and select "Actions" -> "Add New Codeword". You will be prompted for the necessary information.

You could also cheat and edit (carefully) '/var/adm/sw/.codewords'.

Regards!

...JRF...

Re: License Install

Helen French — Wed, 30 Jan 2002 19:22:48 GMT

Hi Mike,

Open swinstall , select Actions and then choose Add codeword. That will help you

HTH,
Shiju

Re: License Install

James R. Ferguson — Wed, 30 Jan 2002 19:23:29 GMT

Hi (again) Mike:

BTW, there is never a letter "o" in any of the codewords; it's always a zero (0) no matter what it looks like!

Regards!

...JRF...

Re: License Install

Sanjay_6 — Thu, 31 Jan 2002 00:10:26 GMT

Hi Mike,

Try this,

Obtain codeword from HP Codewords
Insert the cd and start swinstall
Choose the Local CDrom as the source
Tab to Actions > Add New Codeword
Select the software and mark for installation
Tab to Actions > Install

Hope this helps.

Regds