topic Netbackup in Operating System - HP-UX

Netbackup

carl_46 — Tue, 08 Aug 2000 13:25:11 GMT

Can someone please tell me where I can find a log of the executed commands when running bpadm and the xnb gui interfaces?

Regards

Re: Netbackup

Rick Garland — Tue, 08 Aug 2000 13:56:09 GMT

Is this a Veritas NetBackup?

If so, the looging needs to be turned on. Even with loggin turned on, I am not sure that the commands will be logged.

Re: Netbackup

carl_46 — Tue, 08 Aug 2000 14:36:14 GMT

Sorry, What i meant was when I run the gui and make changes (i.e, change retention, up drives , etc..) I want to see what the actual commands from the command line are.

Regards

Re: Netbackup

Anthony deRito — Tue, 08 Aug 2000 15:06:20 GMT

Yes, there is usually a command line interface to these tools. If you don't get any hits from this forum, I would call the vendor and ask them. Also, they sometimes put this stuff in the Systems Administration Guide.

I have had success in these things by running the action from the GUI and then typing the command:

ps -elf | grep [process_name]

and check the syntax of the actual command running on the system.

Hope this helps,

Tony