topic Re: given "rc" instead of "rcp" am now unable to get by telnet in Operating System - HP-UX

given "rc" instead of "rcp" am now unable to get by telnet

RAKUNTA — Wed, 22 Dec 2010 09:43:03 GMT

Dear Experts

while i am doing in "rcp" in my hp-ux 11iv3 (rx8640) system
unfortunately i given "rc" instead of rcp ,after that my system has done some XXX.Now i am unable to connect bye telnet
please assist me ..........

thanks for your kind reply ,

Re: given "rc" instead of "rcp" am now unable to get by telnet

Dennis Handly — Wed, 22 Dec 2010 09:51:42 GMT

It appears you have executed rc(1m) and possibly have executed scripts that are called when the run level changes.

You could look at /etc/rc.log for recent messages of what happened.

You might be able to undo this by "init 3"

Re: given "rc" instead of "rcp" am now unable to get by telnet

RAKUNTA — Wed, 22 Dec 2010 10:11:02 GMT

Hi HANDLY,

thanQ for your quick reply,,
actually i given below commnad
root@BCM#rc xpinfo.txt 10.5.4.77 :/kiran

here i attached typical log collection of
# /etc/rc.log

please look in to this

am waiting for reply

Re: given "rc" instead of "rcp" am now unable to get by telnet

Dennis Handly — Wed, 22 Dec 2010 10:16:32 GMT

>#rc xpinfo.txt 10.5.4.77 :/kiran
>Transition to run-level 10.5.4.77 in progress

It looks like it did an alphanumeric compare and changed from runlevel 3 to level 1.

Try "init 3".

Re: given "rc" instead of "rcp" am now unable to get by telnet

RAKUNTA — Wed, 22 Dec 2010 10:26:57 GMT

it is clearly showing
--------------------------------
root@BCM#who -r
. run-level 3 Aug 24 14:02 3 0 S
----------------------------------
root@BCM#uptime
3:50pm up 120 days, 1:49, 1 user, load average: 0.01, 0.01, 0.01
-----------------------------------
if i give #init 3
it will effect on my up time report
so is there any way to do something?

Re: given "rc" instead of "rcp" am now unable to get by telnet

Dennis Handly — Wed, 22 Dec 2010 10:43:55 GMT

>if I give #init 3, will effect on my up time report, so is there any way to do something?

Your system is already "down", what do you care?

Re: given "rc" instead of "rcp" am now unable to get by telnet

RAKUNTA — Wed, 22 Dec 2010 10:53:39 GMT

sorry
#init 3
is not working \
root@DC-BCM#init 3
root@DC-BCM#who -r
. run-level 3 Aug 24 14:02 3 0 S
-------------

Re: given "rc" instead of "rcp" am now unable to get by telnet

Dennis Handly — Wed, 22 Dec 2010 11:24:05 GMT

>#init 3
>#who -r
>. run-level 3 Aug 24 14:02 3 0 S

I assume you looked at /etc/rc.log and saw nothing there too?

What does this show?
/sbin/getrunlvl

If "init 3" doesn't do anything because it still thinks it is at 3, you could try:
rc ignore 3

Re: given "rc" instead of "rcp" am now unable to get by telnet

Dennis Handly — Wed, 22 Dec 2010 12:06:25 GMT

And if the above doesn't work, you'll need to do:
init 1
init 3

Re: given "rc" instead of "rcp" am now unable to get by telnet

RAKUNTA — Thu, 23 Dec 2010 08:33:43 GMT

Thanks HANDLY,

i followed your advise.
now its ok

bye
rakunta

Re: given "rc" instead of "rcp" am now unable to get by telnet

RAKUNTA — Thu, 23 Dec 2010 08:35:09 GMT

problem has been resolved thru the solution given by the member in the forum