topic Re: burn image to dvd using growisofs in Operating System - HP-UX

burn image to dvd using growisofs

LJB_1 — Wed, 16 Mar 2011 01:15:06 GMT

I receive the following error when attempting to burn an image to a DVD using growisofs -dvd-compat -Z /dev/rdsk/c0t0d0 -R -J backup.iso:

:-( FAIL: command failed with SCTL_INVALID_REQUEST.
:-( unable to GET CONFIGURATION: I/O error
:-( non-MMC unit?

I have tried several different combinations with the command, and I get the same error each time.

DVD Type is DVD+R
Server Info: HP-UX SVR009 B.11.23 U ia64

ioscan for the DVD-ROM is as follows:
disk 2 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DVD-ROM DW-224EV
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0

file information for /dev/dsk and /dev/rdsk is as follows:

brw-r----- 1 bin sys 31 0x000000 Jun 23 2010 c0t0d0
brw-r----- 1 bin sys 31 0x030000 Jun 23 2010 c3t0d0
brw-r----- 1 bin sys 31 0x030001 Jun 23 2010 c3t0d0s1
brw-r----- 1 bin sys 31 0x030002 Jun 23 2010 c3t0d0s2
brw-r----- 1 bin sys 31 0x030003 Jun 23 2010 c3t0d0s3

crw-r----- 1 bin sys 188 0x000000 Jun 23 2010 c0t0d0
crw-r----- 1 bin sys 188 0x030000 Jun 23 2010 c3t0d0
crw-r----- 1 bin sys 188 0x030001 Jun 23 2010 c3t0d0s1
crw-r----- 1 bin sys 188 0x030002 Jun 23 2010 c3t0d0s2
crw-r----- 1 bin sys 188 0x030003 Jun 23 2010 c3t0d0s3

I have read all the documentation, but it seems that I may have possibly missed something. Any help/ideas would be greatly appreciated.

Re: burn image to dvd using growisofs

Steven Schweda — Wed, 16 Mar 2011 03:49:25 GMT

> I have read all the documentation, [...]

Really? Which "all" is that?

> but it seems that I may have possibly
> missed something.

Possibly. Google found this:

http://www.teac.com/data_storage/combo_drives/dw-224e-v/

[...]
TEAC DW-224E-V is a slim CD
recordable/rewritable and DVD-ROM combo drive
suitable for notebook PCs. Features standard
half inch design, IDE interface and buffer
under-run prevention. Supports disc-at-once,
session-at-once, pocket write and
track-at-once recording mode. Horizontal and
vertical mounting for most system
configurations.
[...]

It's a CD-R/RW, DVD-ROM drive. ROM, as in
Read-Only Memory, should suggest Read-Only,
not Write.

How big is this "backup.iso"? If you can fit
it onto a CD, then this drive might have a
chance of writing it. If you need to write
it to a DVD, then you would seem to need a
different (more capable) drive.

Re: burn image to dvd using growisofs

Matti_Kurkela — Wed, 16 Mar 2011 05:20:39 GMT

The error message indicates growisofs couldn't even get the drive configuration.

Reading the drive configuration would explicitly tell growisofs whether the drive has the necessary write capability or not.
I would have expected a more specific error message if the problem was the lack of hardware support for DVD writing.

If the drive supports even CD-R writing, it should support the MMC SCSI command set, i.e. it should *not* be a "non-MMC unit".

Have you created the "raw SCSI" device node for the DVD-ROM drive?

From the source code of one version of growisofs:
http://dvdplus-prw-tools.sourcearchive.com/documentation/5.21.4.10.8-1/growisofs_8c-source.html
--------------
/*
* Even though /dev/rdsk/cXtYdZ accepts SIOC_IO as well, we have to
* use /dev/rscsi/cXtYlZ for pass-through access in order to avoid
* command replay by upper "class" driver...
*/
--------------

According to "man 7 scsi_ctl", your /dev/rscsi device node should be created like this:

mkdir /dev/rscsi # (if it doesn't already exist)
/usr/sbin/mknod /dev/rscsi/c0t0l0 c 203 0x000000
chmod 600 /dev/rscsi/c0t0l0

NOTE: the letters in the device node name are not the usual c-t-d, but c-t-l (for Controller-Target-LUN).

MK

Re: burn image to dvd using growisofs

Steven Schweda — Wed, 16 Mar 2011 06:45:04 GMT

> I would have expected a more specific error
> message if the problem was the lack of
> hardware support for DVD writing.

So would I, but I know nothing about
"growisofs" or how lame it might be. On the
other hand, the best software in the world
might not be able to get a DVD+R written on a
DVD-ROM drive.

Loading a DVD+R blank into an old CD-R/RW
drive might bewilder either the drive or the
program, too, for all I know (which is, of
course, only what I read on the Web, or
nothing, depending).

Re: burn image to dvd using growisofs

LJB_1 — Thu, 17 Mar 2011 16:37:06 GMT

Thanks for the feedback,

I did set the mknod for rscsi originally. I just failed to include it in my original post.

/dev/rscsi:

crw-r----- 1 bin sys 203 0x000000 Mar 14 05:30 c0t0l0
crw-r----- 1 bin sys 203 0x007000 Jun 23 2010 c0t7d0
crw-r----- 1 bin sys 203 0x017000 Jun 23 2010 c1t7d0
crw-r----- 1 bin sys 203 0x027000 Jun 23 2010 c2t7d0

Documentation that I was referring to was the growisofs documentation. Thanks for the tip though.

I didn't have access to my server, and thought that all of the DVD Drives were Writeable. I was able to check this morning, and I do have two servers with DVD/RW and it still gave the same error.

Still need to do some checking, but I think I found the issue. The server is an rx3600. See below link with ticket information.

http://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=ttr_na-SSB_1000574854

Re: burn image to dvd using growisofs

LJB_1 — Tue, 23 Aug 2011 15:54:15 GMT

It was related to the server/dvd burner as indicated in my previous post.

However, pdf referenced in the fix was broken. Found the text of the document referenced in a ticket similar to my issue:

http://h30499.www3.hp.com/t5/General/USB-00-and-patch-PHKL-37814-1/m-p/4324686#M138649

I did an swremove of USB-00 and loaded the most resent patch for PHKL_37814 along with all of its required patches, and that resolved the issue.

Thanks for the help everyone.

Re: burn image to dvd using growisofs

LJB_1 — Tue, 23 Aug 2011 15:55:06 GMT

Reference: http://h30499.www3.hp.com/t5/General/USB-00-and-patch-PHKL-37814-1/m-p/4324686#M138649

I did an swremove of USB-00 and loaded the most resent patch for PHKL_37814 along with all of its required patches, and that resolved the issue.