topic Re: How do I enable the CSTM infolog? in Operating System - HP-UX

How do I enable the CSTM infolog?

TalH — Tue, 05 Apr 2011 10:04:11 GMT

After running CSTM, I am trying to run:
cstm>selclass qualifier memory;infolog

And this is what I get:
^-(InfoLog) is currently disabled. --

I tried to enable the infolog using monconfig:
/etc/opt/resmon/lbin/monconfig
and then choose "(E)nable Monitoring" from the menu, but still the same output from CSTM. I also tried to run:
/sbin/init.d/diagnostic start

But no change... any idea how to fix this?

Thanks,
Tal

Re: How do I enable the CSTM infolog?

Viktor Balogh — Tue, 05 Apr 2011 10:35:32 GMT

It can take some time until some data will be gathered and you'll able to use (c)stm.

Re: How do I enable the CSTM infolog?

TalH — Tue, 05 Apr 2011 10:37:28 GMT

How much time? more than 2 hours?

Thanks,
Tal

Re: How do I enable the CSTM infolog?

Torsten. — Tue, 05 Apr 2011 11:30:42 GMT

Try

cstm>selclass qualifier memory;wait;infolog

In case of problems, restart the diagnostics daemon.

Re: How do I enable the CSTM infolog?

Hakki Aydin Ucar — Tue, 05 Apr 2011 11:49:05 GMT

Try this syntax:
echo "selclass qualifier memory;info;wait;infolog"|cstm

Re: How do I enable the CSTM infolog?

Torsten. — Tue, 05 Apr 2011 11:52:36 GMT

OK, made a mistake.

If you select a device (sel...), you need to run a tool (info), wait until it has finished (wait) and finally show the log (il).

Re: How do I enable the CSTM infolog?

TalH — Tue, 05 Apr 2011 11:59:21 GMT

Thanks Hakki, it works!