https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284790#M474823 Hi,<BR /><BR />I have reboot one server that has APA configured.<BR />When I up the lan900 interface it shows me:<BR /><BR />#/sbin/init.d/hplm start<BR /> /sbin/init.d/hplm started.<BR /> Reading ASCII file /etc/lanmon/lanconfig.ascii<BR /> ERROR: Ports 2 and 5 can not be aggregated in one failover group, they are not compatible<BR /> Creating Fail-Over Group lan901<BR /> Creating Fail-Over Group lan902<BR /> Updated binary file /etc/lanmon/lanconfig<BR /> /sbin/init.d/hplm Completed successfully.<BR /><BR /><BR />And the server only ups the lan5.<BR />I have look the interface and they are configured with:<BR /><BR />#lanadmin -x 2<BR /> Speed = 1000 Full-Duplex.<BR /> Autonegotiation = On.<BR /><BR />#lanadmin -x 5<BR /> Speed = 100 Full-Duplex.<BR /> Autonegotiation = On.<BR /><BR /><BR />Could it be the problem?<BR /><BR />Thanks a lot of!<BR />Carmen. Fri, 17 Jun 2011 07:02:31 GMT Carme Torca 2011-06-17T07:02:31Z https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284790#M474823 Hi,<BR /><BR />I have reboot one server that has APA configured.<BR />When I up the lan900 interface it shows me:<BR /><BR />#/sbin/init.d/hplm start<BR /> /sbin/init.d/hplm started.<BR /> Reading ASCII file /etc/lanmon/lanconfig.ascii<BR /> ERROR: Ports 2 and 5 can not be aggregated in one failover group, they are not compatible<BR /> Creating Fail-Over Group lan901<BR /> Creating Fail-Over Group lan902<BR /> Updated binary file /etc/lanmon/lanconfig<BR /> /sbin/init.d/hplm Completed successfully.<BR /><BR /><BR />And the server only ups the lan5.<BR />I have look the interface and they are configured with:<BR /><BR />#lanadmin -x 2<BR /> Speed = 1000 Full-Duplex.<BR /> Autonegotiation = On.<BR /><BR />#lanadmin -x 5<BR /> Speed = 100 Full-Duplex.<BR /> Autonegotiation = On.<BR /><BR /><BR />Could it be the problem?<BR /><BR />Thanks a lot of!<BR />Carmen. Fri, 17 Jun 2011 07:02:31 GMT https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284790#M474823 Carme Torca 2011-06-17T07:02:31Z https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284791#M474824 Hi<BR /><BR />speed are different<BR /><BR />lan 2 speed=1000 full duplex <BR />lan5 speed =100<BR /><BR />Autonegociation=on , switch to off and force speed twice cards at 100<BR /><BR />regards Fri, 17 Jun 2011 08:08:38 GMT https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284791#M474824 Ludovic Derlyn 2011-06-17T08:08:38Z https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284792#M474825 - Fri, 17 Jun 2011 10:42:02 GMT https://community.hpe.com/t5/operating-system-hp-ux/problems-with-apa/m-p/5284792#M474825 Carme Torca 2011-06-17T10:42:02Z