topic cpuinfo in Operating System - HP-UX

cpuinfo

whiz_kid911 — Mon, 15 Aug 2011 09:34:41 GMT

i hv a rx8640 with multiple npars, with montecito and montivale

i am planning for an upgrade, and wanna find out cpu if its montecito or montivale for each npar

how can i find this out from hpux

Re: cpuinfo

Turgay Cavdar — Mon, 15 Aug 2011 13:24:44 GMT

Type "machinfo" command, when you see "Itanium 2 9100 series processor" then this is "montvale".

Regards...

Re: cpuinfo

Robert_Jewell — Mon, 15 Aug 2011 16:56:51 GMT

...and conversly the Montecito CPU's will report as 9000 series:

# machinfo
CPU info:
4 Intel(R) Itanium 2 9000 series processors (1.4 GHz, 12 MB)
400 MT/s bus, CPU version A2/B0'
8 logical processors (2 per socket)

Also, from outside the OS you can use the MP's DF command to display CPU information.

For example:

MP:CM> DF, S, X (enter CPU slot)

Look for the FRU Name entry. THe following shows the above Montecito CPU.

FRU Name : MONT_B0'

Montvale CPU's are shown as MTV_xx (or similar).

-Bob