system crash - help

jasonK_1 — Sat, 24 Sep 2011 03:25:48 GMT

I did a reboot and the system crash when starting up. Any idea how I can proceed? The system has two mirror root diskes.

129 processor
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0

    System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
    Swap device table: (start & size given in 512-byte blocks)
        entry 0 - major is 64, minor is 0x2;
SCSI: Completion Interrupt not delivered: count: 1 -- bus: 2

Interrupt Type 18 (Data memory protection/access rights/alignment fault):
Instruction Address (pcsq.pcoq) = 0x0.0x167e00
Instruction (iir) = 0x2ed01220 (load/store)
Target Address (isr.ior) = 0x0.0x000000000e352f70
Base Register (gr22) = 0x000000000e352f70
Savestate Ptr (ssp) = 0x0.0x000000000e353340
Savestate Return Pointer (ss_rp) = 0x0000000000558804

System Panic:

linkstamp:          Sat Aug 18 09:20:40 PDT 2007
_release_version:   @(#)         $Revision: vmunix:    vw: -proj    selectors: C
UPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CU
PI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
panic: Data memory protection/access rights/alignment fault

PC-Offset Stack Trace (read across, top of stack is 1st):
End Of Stack

NOT sync'ing disks (on the ICS) (1 buffer to flush): 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1
1 buffer not flushed
0 buffers still dirty

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR: Can't perform early dump to LVM dump device.

Re: system crash - help

Shibin_2 — Mon, 26 Sep 2011 03:03:47 GMT

Looks like you have some hardware issue. Please log a case with HP Response team, if you have contract.

topic Re: system crash - help in Operating System - HP-UX

system crash - help

Re: system crash - help